GatEvo Connect AI is now available to order through Door Entry Direct, and it arrives as three products built to solve the problems that frustrate gate automation installers every day. The GatEvo Connect AI gives you Wi-Fi, Ethernet and BLE on a single 70 x 70 mm board that draws power directly from any motor board. The GatEvo Connect 4G adds built-in 4G LTE with a pre-installed multi-network SIM for sites without reliable broadband. And the GatEvo ProxPad brings dual-frequency RFID and PIN access over a native RS485 connection, up to 1,200 m from the controller. All three sit on the same installer portal at gatevo.net.

Most gate controllers force a compromise. You get two relays when the job needs three. The Wi-Fi module drops the site the moment the router reboots. The GSM has no logs, so when the client calls you drive out, take a look, and hope the fault is obvious. That's time and money you shouldn't be spending, and GatEvo was built by installers who felt exactly the same way.

We stock GatEvo Connect AI because it delivers where standard hardware lets installers down. Six programmable relay outputs mean you can control the main gate, pedestrian door, barrier and external lighting from one board, without bolting on extra modules. The 9-36V AC/DC input on the Connect AI draws power directly from the motor board, so there's no separate supply to source. And if the internet goes down, BLE 5.0 automatically keeps the app working locally so clients are never locked out mid-job.

The installer portal at gatevo.net gives you a single dashboard for every client site. Push firmware updates, activate SIMs, run diagnostics, adjust schedules. All of it without leaving the office.

Keep working with hardware that can't tell you anything when a client calls and nothing changes. These three products give you what standard hardware never could: visibility, flexibility and a system that manages itself between visits.