TALOS 94 HRC Hydraulic Bollard 500x275mm stainless steel

Fadini 9470A4HL TALOS 94 HRC Automatic Hydraulic Bollard - 700 mm x ¿275 mm, Stainless Steel

The Fadini 9470A4HL pairs the TALOS 94 HRC (High Resistance Cylinder) automatic hydraulic bollard with a brushed stainless steel ¿275 mm x 4 mm cylinder that rises 700 mm above ground. It gives you firm control over which vehicles come onto your site, keeping unauthorised traffic out while authorised users pass without fuss.

As an HRC model, 400 mm of the raised cylinder stays guided inside the casing - twice the 200 mm of the standard version - lifting impact resistance to 70,000 J and breakout resistance to 420,000 J. Oil-hydraulic drive at 230 Vac raises the cylinder in about 3.00 s and lowers it in about 2.80 s, and the bollard is hydraulically locked in the raised position. Each bollard has its own hydraulic power unit at the top of the structure for easier maintenance, and the supplied release key lets you lower it manually in an emergency. The aluminium head with rubber edge carries 12 integrated LED lights and 80 mm retro-reflective film for clear visibility.

Add the options your site needs - fail-safe lowering, obstacle detection or a heater - and enjoy access control that simply works.

Key Features

• Fully retractable automatic hydraulic bollard, 700 mm above ground
• 400 mm guided length (HRC) for higher impact and breakout resistance
• Hydraulic locking in the raised position (fail secure as standard)
• Manual emergency lowering with the supplied release key
• Independent hydraulic power unit at the top of each bollard for easier maintenance
• Aluminium head with rubber edge, 12 integrated LED lights and 80 mm micro-prismatic retro-reflective film
• Hall-effect limit sensors and IP66 connector and junction box
• Rated for intensive use - 2,000 cycles per day
• Optional fail-safe 24 Vdc solenoid valve (9569L), obstacle detector (9568L), heater for -40 ¡C (9570L) and beeper (9567L)
• One Fadini control panel can manage up to four bollards simultaneously

Technical Specifications

• Part Number: 9470A4HL
• Model: TALOS 94 HRC automatic (oil-hydraulic)
• Height above ground: 700 mm
• Cylinder diameter: ¿275 mm
• Cylinder thickness: 4 mm
• Cylinder material: Brushed stainless steel
• Guided length: 400 mm (HRC)
• Impact resistance: 70,000 J
• Breakout resistance: 420,000 J
• Rising time: approx. 3.00 s
• Lowering time: approx. 2.80 s
• Piston stroke: 710 mm
• Power supply: 230 Vac 50 Hz
• Absorbed power: 1,100 W
• Hydraulic unit: TUNIT 3.20LP, 1 MPa (10 bar), 3 l reservoir
• Protection grade: IP67 (IP65 with pressure switch and solenoid valve)
• Duty: 2,000 cycles/day
• Working temperature: -20 ¡C to +80 ¡C (-40 ¡C with optional heater)
• Max static load (lowered): 20,000 kg
• Compatible ground pit: 9561L (H 1210 mm)