Aiphone AC-10S Surface Mount Vandal Resistant Access Control Keypad

The Aiphone AC-10S is a surface mount access control keypad built from vandal resistant zinc die-cast housing. Designed for use with JP-DV series entry panels, it provides standalone code-based access control with two independent relay outputs.

Aiphone AC-10S Vandal Resistant Access Control Keypad

The first relay stores up to 60 user codes and the second stores up to 40, giving a total capacity of 100 programmable codes. Each code can be set between four and six digits in length. Two LEDs and an audible buzzer confirm the result of each operation. Programming is carried out directly on the keypad using the master code, with no additional software required.

A permanent backup memory ensures all stored codes are retained in the event of a power failure. The backlit buttons allow clear visibility in low-light conditions. Terminals include NO1, C1, PB1, C, V and V connections.

Key Features

• Two independent relay outputs (60 + 40 code capacity)
• 100 programmable user codes (4 to 6 digits each)
• Vandal resistant zinc die-cast construction
• Permanent backup memory for power failure protection
• Backlit buttons for low-light operation
• LED and buzzer operation indicators
• On-keypad programming via master code
• Compatible with JP-DV series entry panels

Technical Specifications

• Power supply: 12/24 V AC or DC
• Relay contacts: NO/NC, 1 A at 24 V AC-DC or 2 A at 12 V AC-DC
• User code capacity: 100 codes (60 on relay 1, 40 on relay 2)
• Code length: 4 to 6 digits
• Mounting: Surface mount

Dimensions

• 125 x 98 x 33 mm (H x W x D)