AES EKPD Wireless Battery Powered Keypad for e-Loop Systems

The AES EKPD is a standalone wireless keypad for gate and door entry access control. Operating on 433.39MHz with 128-bit encryption, it transmits securely to compatible AES e-Loop transceivers without any wiring between the keypad and the controller. Powered by a single CR2450 coin cell battery with an ultra-low standby current of 200nA, the unit delivers years of service life in typical use.

AES EKPD Wireless Keypad for Gate and Door Entry Access

The waterproof housing mounts externally with just two screws and requires no wiring, making it ideal for retrofit installations or sites where trenching is impractical. The EKPD stores up to 200 user codes with 4 to 8 digit PIN operation, plus one supervisor code for administrative functions. Three independent channels provide flexibility for controlling multiple access points or functions.

Limited-use codes are available for temporary access such as deliveries or contractors. The keypad can also be unlocked and used simply as an entry button. This is the keypad-only variant; a transceiver is required and sold separately. For a complete kit with e-Trans-50 transceiver included, see AES EKPD-K.

Key Features

• Wireless operation with no cabling required
• 433.39MHz transceiver with 128-bit encryption
• Up to 200 user codes plus 1 supervisor code
• 4 to 8 digit PIN code operation
• 3 independent relay channels
• Limited-use codes for temporary access
• Can be unlocked and used as an entry button
• Waterproof housing for outdoor installation
• CR2450 coin cell battery powered
• Mounts with just 2 screws, no wiring

Technical Specifications

• Supply Voltage: 3V DC
• Frequency: 433.39MHz
• Encryption: AES 128-bit
• Channels: 3
• User Codes: Up to 200
• Supervisor Codes: 1
• Code Length: 4 to 8 digits
• Battery Type: CR2450 coin cell
• Battery Capacity: 540mA
• Standby Current: 200nA
• Peak Current: 10mA
• Housing: Waterproof

Dimensions

• Keypad: 132mm x 90mm x 20mm