Loading...

AES ELOOP Inground Commercial Radar Loop PRESENCE MODE LCD Transceiver

£624.08 £520.07
SKU
EL00IG-RAD-KLT
  • This product is available to order. The lead time is normally 7 – 9 working days.
  • An accurate despatch date will be confirmed with you once order is received by our sales team (during office hours).
Free Delivery

Free Delivery on this product

AES EL00IG-RAD-KLT E-LOOP Inground Commercial Radar Loop PRESENCE MODE with LCD Transceiver

AES EL00IG-RAD-KLT E-LOOP Inground Commercial Radar Loop PRESENCE MODE with LCD Transceiver

The Inground Wireless Vehicle Detection System uses magnetometer sensors to detect the presence and movement of vehicles. These detections are transmitted to a nearby transceiver for gate activation. The sensors are installed in the ground of entry or exit passages using sikaflex, contain a replaceable Lithium battery, and can withstand almost any vehicle. Gate or door controller must have a dedicated open input and autoclose function enabled.

The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilises two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.

Both e-loop models are available in two modes: PRESENCE MODE WITH ADDED RADAR PROTECTION OR EXIT MODE.

This Kit Includes:

  • 1 x e-Loop Inground Presence mode
  • 1 x e-Trans 200 (transceiver)
  • 1 x Magnet

Features:

  • Fast and simple installation (quick non-permanent installation)
  • Not effected by ground movement
  • Range up to 50 metres/yards
  • Presence Mode
  • Commercial Inground E-loop Flush Mounted
  • Lower power consumption: 3-axis magnetometer for vehicle detection
  • Compact design
  • Compatible with various gates
  • Reliable radio communications with transceiver

Technical Specifications:

  • 8 Hz sampling rate
  • Auto-calibration
  • Exit/Entry detection mode
  • 14500 mA battery (included) giving up to 6-10 years of battery life (depending on mode).
  • Top access for changing the battery
  • High security 128-bit encryption
  • IP rating: IP68

Dimensions:

  • Recesses into the driveway Ñ 55mm inground height x 89mm diameter.
More Information
Brand AES
Door Entry Direct © 2025. All rights reserved.