AES EKPD-K Wireless Keypad Kit with e-Trans-50 Transceiver

The AES EKPD-K is a complete wireless keypad access control kit comprising the AES EKPD wireless keypad and an e-Trans-50 transceiver. This kit provides everything needed for a standalone wireless keypad installation controlling gate or door locks without any cabling between the keypad and the automation controller.

AES EKPD-K Wireless Keypad Kit for Gate and Door Entry

The keypad mounts at the entry point and communicates wirelessly with the e-Trans-50 transceiver connected to the gate motor or electric lock. The system operates on 433.39MHz with 128-bit encryption to prevent code interception. The keypad is powered by a CR2450 coin cell battery with ultra-low 200nA standby current for years of service life.

Stores up to 200 user codes with 4 to 8 digit PIN operation. Three independent channels allow multi-function control configurations. Ideal for retrofit applications or locations where trenching is impractical. Limited-use codes are available for temporary access. For the keypad only without transceiver, see AES EKPD.

Kit Contents

• 1 x AES EKPD wireless keypad
• 1 x e-Trans-50 transceiver

Key Features

• Complete kit with keypad and transceiver ready to install
• Wireless communication at 433.39MHz with 128-bit encryption
• Up to 200 user codes with 4 to 8 digit PIN operation
• 3 independent relay channels
• CR2450 battery powered with multi-year service life
• Waterproof keypad housing for outdoor mounting
• No wiring required between keypad and controller
• Limited-use codes available for temporary access
• Can be unlocked and used as an entry button

Technical Specifications

• Supply Voltage: 3V DC (keypad)
• Frequency: 433.39MHz
• Encryption: AES 128-bit
• Channels: 3
• User Codes: Up to 200
• Code Length: 4 to 8 digits
• Battery Type: CR2450 coin cell
• Battery Capacity: 540mA
• Standby Current: 200nA
• Peak Current: 10mA
• Housing: Waterproof

Dimensions

• Keypad: 132mm x 90mm x 20mm