Adams Rite 7100-315-628 | Electric Strike 12V DC Fail Unlocked SAA

£319.31 £266.09
In stock
In Stock
Free Delivery

Free Delivery on this product

Adams Rite 7100-315-628 | Electric Strike 12V DC Fail Unlocked SAA

Adams Rite 7100-315-628 | Electric Strike 12V DC Fail Unlocked SAA

Used for remote access with the Adams Rite 4700 series (or similar) dead latch, this electric strike door lock is engineered with stainless steel for strength and security and has a satin anodised aluminium finish.

It benifits from the ability to change its duty from a fail-safe to a fail secure and vice-versa, making it very versatile.

This mechanism is suitable for aluminium doors, has a 907kg holding force, and additionally comes with a 3 year manufacturers warranty.

It also conforms to the ANSI/BHMA 156.5 Grade 1 standard.

Adams Rite is renowned for their high quality aluminium products and has been a major player in the industry since the 1950s.


  • Facility to change duty from fail-safe to fail secure and vice-versa.
  • Non-handed.
  • The compact mechanism fits into an aluminium jamb section as shallow as 44.45mm
  • Electrical actuation unlocks the strike jaw, releasing the latchbolt so the door can be opened without operating the latch itself.
  • The 7100 series have flat faceplates for mounting in the frame of a single action single leaf doors.

Technical Specifications:

  • Current Draw: 12V AC=1.48A, 12V DC=0.332A, 24V AC=0.74A, 24V DC=0.19A (nominal). DC intermittent and continuous units are silent.
  • VoltageTolerance:+-10%.
  • Powered by: Internal solenoid.
  • Monitoring: (Optional - not included) Single: Latch only, Double: Latch &solenoid.
  • Duty: Fail-safe or fail-secure (convertible without additional parts). DC power supply required for fail-safe operation.
  • Jaw Strength: 907kg (2000lbs).
  • Case: 85.6mm x 28.6mm x 41.6mm. Zinc aluminium alloy.
  • Mechanism: Stainless steel internal blocking mechanism.
  • Strike Opening: 36.5mm x 15.9mm x 12.7mm. Stainless steel bolt retainer jaw.
  • Door gap: Minimum 3mm (1/8), operational door gap 3-5mm.
  • Faceplate: Aluminium. 123.7mm x 31.8mm. Flat.
  • Finish: Satin Anodised Aluminium.
  • Subcover: Basic subcover lip will suit a 44.45mm (1 3/4 inch) thick door that closes flush with jamb edge. For extended bolt-on subcovers see ordering codes.
  • Standards: ANSI/BHMA 156.5 Grade 1. UL Listed for burglary resistance.
More Information
Brand Adams Rite
Fitting Mortice (flush)
Strike Operation Fail Locked (Fail secure)
Voltage 12.0 Volt DC
Handing Reversible (Right or Left hand)
Type of Device Mortice latch release
Fits into (onto) Aluminium frame
Finish Anodised Aluminium
Adams Rite data sheet 7100 series pdf(0.15MB)
Duty selection instructions pdf(0.27MB)
Door Entry Direct © 2024. All rights reserved.