VIGILO h600mm automatic w/o casing

Fadini 2263WL VIGILO 600 mm Automatic Hydraulic Bollard, ¿200 mm - Supplied Without Casing

Fadini's VIGILO 2263WL automatic hydraulic bollard rises 600 mm from the ground on a heavy-duty ¿200 mm powder-coated steel cylinder. If vehicles are cutting through, parking where they shouldn't or entering without permission, it gives you a clear physical barrier that retracts fully for authorised traffic on residential, commercial and industrial sites.

Because the motor-pump and actuator sit inside the bollard itself and the unit is lightweight, the pit needs no special excavation or brickwork. Once raised, VIGILO is held by oil-hydraulic locking, travel is managed by Hall-effect limit switches and it rises in approximately 5.9 s. In a power failure it can be lowered manually with the release spanner supplied; a solenoid valve version is available where automatic lowering is preferred. The S235JRH steel cylinder is cataphoresis treated and polyester powder coated in RAL 7016, with an aluminium head and rubber edge guard. Supplied without foundation casing - order ground pit 2246L separately.

With 30,000 J impact resistance and 160,000 J breakout resistance, VIGILO lets you protect your site with confidence. Select the 600 mm height that suits your entrance and run several bollards from one control unit.

Key Features

• Supplied without foundation casing - ground pit ordered separately
• Fully retractable oil-hydraulic operation, 230 Vac
• Hydraulic locking in the raised position; release spanner supplied for manual emergency lowering
• Motor-pump and actuator housed inside the bollard
• Lightweight design - pit needs no special excavation or brickwork
• Hall-effect limit switches
• Heavy-duty use: up to 2,000 cycles per day
• Aluminium head with rubber edge guard
• Cold-climate accessories (2590L) allow operation down to -40 ¡C

Technical Specifications

• Part Number: 2263WL
• Product type: Automatic retractable oil-hydraulic bollard
• Range: Fadini VIGILO
• Height from ground: 600 mm
• Cylinder diameter: ¿200 mm
• Cylinder thickness: 4 mm
• Cylinder material: S235JRH steel
• Finish: Cataphoresis + polyester powder coating, RAL 7016
• Foundation casing (ground pit): Not included - order 2246L
• Rising time: approx. 5.9 s
• Power supply: 230 Vac 50 Hz (±10%)
• Absorbed power: 330 W
• Absorbed current: 1.8 A
• Power output: 0.25 kW (0.33 HP)
• Motor-pump protection: IP67
• Frequency of use: Heavy duty, 2,000 cycles/day
• Impact resistance: 30,000 J
• Breakout resistance: 160,000 J
• Max static load (lowered): 20,000 kg
• Working temperature: -20 ¡C to +80 ¡C (-40 ¡C with cold-climate accessories)
• Hydraulic oil: Fadini 708L
• Emergency lowering: Manual with release spanner