Videx Add MiAccess Proximity Reader to Vandal Resistant Panel

Videx VRMI Add a MiAccess Proximity Reader with Smart Mifare PC Programming and USB Port to a Vandal Resistant Series Panel

The VRMI vandal resistant panel mount MiAccess reader is available for the VR120 series, VR130 series and bespoke Vandal Resistant panels.

This reader can be programmed and configured directly using the PROA-MS or PROH-MS PC management software (available to download for free from https://software.videxservices.uk) using the micro-USB connection on the back of the reader.

MiAccess fobs and cards are initally registered via the USB desktop reader (PROX-USB) connected to a laptop or PC and then the fob and card data along with reader configuration can be uploaded to the MiAccess reader.

Please Note: This is the MiAccess Proximity Reader (to add to a Vandal Resistant Series Panel) only.

Features:

• Panel mount reader available for Vandal Resistant panels
• Mifare reader with sector read/write and support for Mifare classic, 1K & 4K card types
• Read range of up to 6cm with an operating frequency of 13.56MHz
• Programming and configuration using PC software
• Firmware upgrades supported via the micro-USB connection

Technical Specifications:

• Operating Voltage: 12Vdc power input
• Current Consumption: 150mA (max.) during operation
• Data Connectivity: micro-USB port for connection to a PC
• Outputs: 1 x built-in relay (2A @ 24Vac/dc) programmable from 1-255 seconds or 0 seconds for ON/OFF toggle mode, 1 x RS485 bus connection for remote Ôtouch to exitÕ button and relay unit (RTTS surface or DINRTT flush)
• Inputs: push button
• Tamper Protection
• Status Indication: Tri-colour halo LED (amber, green and red) and buzzer
• Working Temperature (C): -20 to +50

Dimensions:

• Overall dimensions dependent on VR panel size