Trimec ES8100 V-Lock with Retrofit Strike Narrow

Trimec ES8100-004 ES8100 V-Lock motorised drop bolt supplied with narrow retrofit strike plate. This is the redesigned successor to the Trimec ES8000 V-Lock, featuring a high torque motorised bolt that moves into a V-shaped strike plate, pulling the door into alignment when locked.

The ES8100 retains the original ES8000 body and faceplate footprint, making it a direct retrofit replacement. The narrow retrofit strike plate utilises the same fixing locations as the ES8000 strike. Wiring supports 3-wire mode with permanent power positive (12-24Vdc), negative return, and switching input. One-step PTO/PTL configuration is selectable on site.

About This Product

The Trimec ES8100-004 is a motorised V-Lock drop bolt with a narrow retrofit strike plate, designed as a direct replacement for the original Trimec ES8000. It is ideal for installers upgrading existing ES8000 installations or specifying new projects requiring motorised door alignment correction, door position monitoring, and high preload tolerance in commercial access control applications.

Key Features

• High torque motorised bolt with V-shaped strike plate for door alignment correction
• 100kg preload rating — significantly improved over the ES8000
• 12mm door misalignment correction (increased from 7mm on ES8000)
• Integrated door position monitoring
• Integrated LED lock status and diagnostics indication
• One-step PTO/PTL on-site configuration
• IP53 rated for external door applications
• Direct retrofit to Trimec ES8000 — same body and faceplate footprint

Technical Specifications

• Voltage: 12-24Vdc
• Preload Rating: 100kg
• Door Misalignment Correction: 12mm
• IP Rating: IP53
• Lock Type: Motorised drop bolt (V-Lock)
• Locking Mode: PTO/PTL field selectable
• Monitoring: Integrated door position monitoring
• Diagnostics: Integrated LED status indication
• Faceplate Finish: Satin stainless steel
• Strike Plate: Narrow retrofit (compatible with ES8000 fixing locations)
• Retrofit Compatibility: Direct replacement for Trimec ES8000

Common Questions

• Can the ES8100 replace an existing ES8000? Yes. The ES8100 body and faceplate retain the original ES8000 footprint and it is a direct retrofit. The strike plate uses the same fixing locations but is 3mm wider.
• Is the ES8100 suitable for external doors? Yes. It carries an IP53 rating for external door applications.
• What is the difference between this and the standard ES8100 strike? The ES8100-004 is supplied with a narrow retrofit strike plate, designed specifically for upgrading ES8000 installations without additional frame modification.

Compatibility

Direct retrofit replacement for the Trimec ES8000 V-Lock. Compatible with existing ES8000 frame preparations. Narrow retrofit strike plate uses the same fixing locations as the original ES8000 strike.