TALOS M50 automatic w/o casing

Fadini 9690WL TALOS M50 Automatic Anti-Terrorism Hydraulic Bollard - 1,000 mm x ¿275 mm, without Casing

Supplied without foundation casing, the Fadini 9690WL TALOS M50 is a fully retractable, heavy-duty automatic anti-terrorism bollard, 1,000 mm high with a ¿275 mm x 20 mm S355K2H steel cylinder. It is designed for embassies, military bases, government buildings and banks - sites where a hostile vehicle attack is a real concern and protection cannot be compromised.

Designed and tested to stop a 7.5 t vehicle at 80 km/h in a single-bollard configuration while remaining intact and operational, it is certified to ASTM F2656-15 C750, PAS 68:2013 V/7500 (N3)/80 and IWA 14-1:2013 V/7200 [N3C]/80. It offers 700,000 J impact resistance and 2,000,000 J breakout resistance, normally rises in about 5.0 s and lowers in about 3.2 s, is hydraulically locked when raised and can be lowered manually with the supplied spanner. Please note this version is supplied without the foundation casing.

Choose the 9690WL when you need the bollard without casing - with all the protection of the full model.

Key Features

• Certified ASTM F2656-15 C750, PAS 68:2013 V/7500 (N3)/80 and IWA 14-1:2013 V/7200 [N3C]/80
• Stops a 7.5 t vehicle at 80 km/h with a single bollard, remaining intact and operational
• 20 mm S355K2H steel cylinder, cataphoresis + RAL 7016 anthracite grey; optional AISI 304 sleeve (9688L)
• Hydraulic locking in the raised position; manual emergency lowering with supplied spanner
• Aluminium head with rubber edge, 12 flashing LEDs and 80 mm retro-reflective film
• Optional heater for operation down to -40 ¡C

Technical Specifications

• Part Number: 9690WL
• Model: TALOS M50 automatic
• Height above ground: 1,000 mm
• Cylinder diameter: ¿275 mm
• Cylinder thickness: 20 mm
• Cylinder material: S355K2H steel, cataphoresis + RAL 7016
• Crash rating: ASTM F2656-15 C750; PAS 68:2013 V/7500 (N3)/80; IWA 14-1:2013 V/7200 [N3C]/80
• Impact resistance: 700,000 J
• Breakout resistance: 2,000,000 J
• Rising time: approx. 5.0 s
• Lowering time: approx. 3.2 s
• Shaft travel: 1,010 mm
• Power supply: 230 Vac 50 Hz
• Absorbed power: 3,100 W (1,550 + 1,550)
• Rated current: 10 - 13 A (max 15 A)
• Hydraulic unit: TUNIT 9.20LP, 2 MPa (20 bar), 4.5 + 4.5 l, IP67
• Duty: 2,000 cycles/day
• Working temperature: -20 ¡C to +80 ¡C (-40 ¡C with optional heater)
• Max static load: 2,800 kg raised; 20,000 kg lowered
• Supplied: Without foundation casing