We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Fadini COMBI 740 Gate Operator, 175 Degree, Double-Locking, Right
- This product is available to order. The lead time is normally 1 – 3 working days.
- An accurate despatch date will be confirmed with you once order is received by our sales team (during office hours).
Free Delivery on this product
Fadini COMBI 740 Double-Locking Underground Operator with Flow Regulator
Fitted with a flow regulator for fine control of gate speed, the Fadini COMBI 740 F/7697BB3DXL is a 175 degree underground hydraulic swing gate operator with bidirectional hydraulic locking (double-locking), in the right-hand version. Its 175 degree shaft rotation lets leaves open well beyond square on residential and industrial entrances, and with the whole drive below ground there is no bulky arm to spoil the look of a gate of up to 3 m and 700 kg.
The oil-hydraulic motor-pump and double-stroke jack form one compact unit that sits in a foundation box cemented below the gate at the hinge, so the operator is completely concealed. Bidirectional hydraulic locking holds the gate in both the open and closed positions. A flow regulator adjusts gate speed in both directions, suited to leaves wider than 2.5 m. Thrust is set with maximum and minimum pressure valves, while by-pass valves provide anti-crush safety. Fadini recommends an electric lock on leaves over 2.0 m.
Install it in a 745L zinc-coated or 762L stainless steel foundation box and connect it to a Fadini control board mounted in a sheltered place. Choose the right-hand (DX) model to match your gate, viewed from inside, and enjoy a clean entrance that opens and closes dependably.
Key Features
- Concealed underground installation - motor-pump and jack in a single unit inside the foundation box
- 175 degree shaft rotation
- Bidirectional hydraulic locking in both open and closed positions
- Non-braking version for leaves up to 3 m / 700 kg
- Flow regulator to adjust gate speed in both directions
- Adjustable thrust via pressure valves, with by-pass valves for anti-crush safety
- Electric motor fully immersed in oil, coupled to a lobe gear pump
- Does not require special maintenance
- Off-axis installation possible with the 7033L arm and guide (175 degree versions only)
Technical Specifications
- Product type: Underground oil-hydraulic operator for swing gates
- Shaft rotation: 175 degrees
- Hand: Right-hand (DX), gate viewed from inside
- Hydraulic locking: Bidirectional (double-locking)
- Flow regulator: Yes
- Max. leaf length / weight: 3 m / 700 kg
- Power supply: 230 Vac - 50 Hz
- Absorbed power: 250 W
- Absorbed current: 1.2 A
- Power output: 0.18 kW (0.25 HP)
- Motor: Two-phase, class H, 1,350 rpm, 12.5 uF capacitor, S3 intermittent service
- Pump flow rate (P3): 0.85 l/min
- Maximum pressure: 30 atm
- Torque: 250 - 400 Nm
- Piston diameter / stroke: 75 mm / 52 mm
- Opening/closing time: approx. 28 s
- Duty cycle: 40 cycles/hour
- Frequency of use: Intensive
- Working temperature: -20 degrees C to +80 degrees C (down to -40 degrees C with specific optional accessories)
- Protection rating: IP 67
- Oil type: Fadini HF.PLI hydraulic oil (708L)
- Weight (with foundation box): 27 kg
- Overall dimensions (L x W x H): 470 x 300 x 140 mm
- Supply cable: 4 x 1 mm2, 2.50 m long
- Foundation box: Sold separately - 745L zinc-coated steel or 762L AISI 304 stainless steel
| Brand | Fadini |
|---|