Fermax IP/DUOX PLUS Camera Interface and IP Camera Kit

Fermax F-9453 IP/DUOX PLUS Camera Interface and IP Camera Kit

The Fermax F-9453 is a pre-configured Plug and Play kit containing the IP/DUOX PLUS camera interface and an IP dome camera, ready for immediate installation. For the most common use case of one entrance panel with one additional camera, the installer simply connects the components without any configuration of the camera or interface.

For other use cases (multiple cameras, different block configurations), the camera and interface will need to be configured as described in the product manual. The kit includes the camera power supply and adapter, though the camera can alternatively be powered via a PoE switch.

Key Features

• Pre-configured Plug and Play for single panel plus single camera installations
• Converts RTSP IP video to DUOX PLUS bus signal
• Camera power supply and adapter included
• Alternative PoE powering supported for the camera
• Interface powered directly from the DUOX PLUS bus
• Wi-Fi configuration via embedded web server (for non-standard setups)
• Check compatibility with Fermax technical department

Kit Contents

• IP/DUOX PLUS Camera Interface (ref. 9454)
• IP Dome Camera (ref. 9985)
• Power Supply for IP Camera (ref. 9982)
• Power Adapter for IP Camera (ref. 9984)

Technical Specifications

• Interface standby consumption at 18 Vdc: 140 mA (max)
• Interface standby consumption at 24 Vdc: 104 mA (max)
• Interface active consumption at 18 Vdc: 153 mA (max)
• Interface active consumption at 24 Vdc: 110 mA (max)
• Interface operating temperature: -10 to +55 degrees C
• Interface humidity (non-condensing): 5% to 90%
• Video input protocol: RTSP (standard IP)
• Maximum cameras per interface: 2 (same block, PoE switch required)
• Interface mounting: DIN 6 rail (106 mm with brackets, 89 mm without)
• Technology: DUOX PLUS