Fermax 12Vdc PoE Splitter for Powering Non-PoE Panels via PoE Switch

Fermax 1498 12Vdc PoE Splitter

Device for powering non-PoE panels via a PoE switch.

This splitter is designed to supply IP devices requiring supply voltage of 12V DC.

It is useful for MEET devices that do not admit PoE, such as MILO panels and MIO monitors, if there is PoE switches in the installation.

It is built on the basis of a highperformance DC/DC converter reducing the voltage from 44Ö57V DC to 12V DC, The maximum load current is 1,25 A (Pmax=15W).

The supply voltage (POWER) and data (DATA) are supplied at the module input (the RJ-45 socket) from a PoE device. The data (DATA) is transmitted to the output (the RJ-45 plug) only, while the 12V DC supply voltage is supplied at the DC plug.

Features:

• Power supply output for MEET devices: 1,25A/12V DC
• Input voltage range: 44Ö57V DC
• High efficiency 84%
• Designed for 10Mbit/s and 100Mbit/s network
• Optical LED indication
• Protections: Short-circuit protection SCP and Overload protection OLP

Technical Specifications:

• Current consumption: 0,32AÖ0,41A
• Module power: 15W
• Output voltage: 12V DC
• Output current: 1,25A
• Ripple voltage: 150mV p-p max.
• PoE standard: IEEE 802.3af/at
• Input connector: RJ-45 socket
• Operating temperature (C): -10 to +40