Entryphone PN4CU PinNet 4-Door Access Control Unit

Entryphone PN4CU PinNet 4-Door RFID Access Control Unit

The Entryphone PN4CU is the main control unit for the PinNet 4 on-line access control system. It controls up to four doors using 125KHz RFID (EM4100) fob readers and four independent lock relay outputs. The unit features a built-in web server accessible via any standard browser over Ethernet, requiring no special software for programming or administration.

Where on-site administration is not practical, tenants can add their own key fobs using unique encrypted activation codes. The optional PN4GSM GSM modem enables remote fob management via SMS and door release by validated phone number. An optional backup battery (PN4BB) provides power continuity during mains failure.

The PN4CU supports both fail-safe and fail-secure lock configurations, with request-to-exit inputs for each door. Eight configurable time profiles allow granular scheduling of access permissions, and a 1000-entry activity log records all fob, PIN, phone and RTE events with timestamps.

Key Features

• Controls up to 4 doors with 4 RFID readers and 4 lock relays
• Built-in web server for browser-based programming — no software required
• Up to 1000 users with individual start and expiry dates
• 1000-entry activity log with timestamped events
• 8 configurable time profiles with per-day scheduling
• 125KHz RFID (EM4100) technology
• Supports fail-safe and fail-secure lock configurations
• Request-to-exit input per door
• Encrypted activation codes for tenant self-registration
• Secure one-day password system for maintenance access
• Automatic BST/GMT clock adjustment
• Optional GSM modem for SMS fob management and phone-based door release
• Ethernet (RJ45) network connection with DHCP support
• Password-protected web interface

Technical Specifications

• Lock output voltage: 12V AC or DC
• Max readers: 4
• Max lock relays: 4
• Max users: 1000
• Activity log capacity: 1000 entries
• Time profiles: 8
• Lock release time: configurable 0-10 seconds per reader
• RFID technology: 125KHz EM4100
• Network connection: Ethernet RJ45
• Default IP address: 192.168.0.254
• Default subnet mask: 255.255.255.0
• Default gateway: 192.168.0.1
• Default port: 80
• DHCP: disabled by default, enabled via J12 jumper
• MAC address prefix: 00:60:35
• Mounting: wall mount

Dimensions

• H 300 x W 230 x D 110 mm