Comelit DIGITAL CALL brass engravable iKall video with prox + trades

Comelit VK6599/08T - DIGITAL CALL vandal resistant brass video door entry phone intercom panel with cut out for proximity reader, Size A27

Comelit vandal resistant digital call video, polished brass, vandal resistant , engravable , door entry intercom panel. The vandal resistant door entry panel with cut out for proximity reader, is suitable for external use and is flush fitting.

Front plate is polished brass, vandal resistant , 2.5mm thick (12g)

TRADE Button

This door entry panel has a TRADE button. This allows access (eg. for the postman) by pressing the TRADE button during pre-determined hours. The TRADE button is normally used in conjunction with a time clock to define the hours of operation.

Inside the panel every nut, bolt and screw is stainless steel for maximum corrosion protection (and even the back box is stainless steel)

The panel can be laser engraved ENG to your requirements although this is not essential on single button panels.

Comelit VK6599/08T Requires:

• 1 x 1250IV Mounting Bracket for Camera Unit
• 1 x Compatible IKall Camera Unit
• 1 x Compatible Digital Call Module
• 1 x Time Clock (if not using the digital call module to program)

Features:

• Vandal resistant
• Engravable
• Flush mounted
• Polished brass
• Prox Reader Cut-Out
• Trade Button

Dimensions - size A27

• Front Plate 350 x 136 x 2.5 (hwd mm)
• Back Box 330 x 116 x 70 (hwd mm)