TALOS 94 HRC Hydraulic Bollard 500x275mm stainless steel 316

Fadini 9480A6HL TALOS 94 HRC Automatic Hydraulic Bollard - 800 mm x ¿275 mm, 316 Stainless Steel

The Fadini 9480A6HL pairs the TALOS 94 HRC (High Resistance Cylinder) automatic hydraulic bollard with a brushed AISI 316 stainless steel ¿275 mm x 4 mm cylinder that rises 800 mm above ground. When you need to decide who drives in - and stop everyone else - it gives you a physical barrier that rises on command and retracts fully when access is allowed.

As an HRC model, 400 mm of the raised cylinder stays guided inside the casing - twice the 200 mm of the standard version - lifting impact resistance to 70,000 J and breakout resistance to 420,000 J. It rises in about 3.42 s and lowers in about 3.20 s, locks hydraulically when raised and can be lowered by hand with the supplied release key if the power fails. With an independent hydraulic power unit positioned at the top, servicing is quicker and simpler, while 12 integrated LED lights in the rubber-edged aluminium head and 80 mm retro-reflective film keep the bollard clearly visible.

Specify the 9480A6HL for a 800 mm protective height and give your site dependable control over every vehicle that approaches.

Key Features

• Fully retractable automatic hydraulic bollard, 800 mm above ground
• 400 mm guided length (HRC) for higher impact and breakout resistance
• Hydraulic locking in the raised position (fail secure as standard)
• Manual emergency lowering with the supplied release key
• Independent hydraulic power unit at the top of each bollard for easier maintenance
• Aluminium head with rubber edge, 12 integrated LED lights and 80 mm micro-prismatic retro-reflective film
• Hall-effect limit sensors and IP66 connector and junction box
• Rated for intensive use - 2,000 cycles per day
• Optional fail-safe 24 Vdc solenoid valve (9569L), obstacle detector (9568L), heater for -40 ¡C (9570L) and beeper (9567L)
• One Fadini control panel can manage up to four bollards simultaneously

Technical Specifications

• Part Number: 9480A6HL
• Model: TALOS 94 HRC automatic (oil-hydraulic)
• Height above ground: 800 mm
• Cylinder diameter: ¿275 mm
• Cylinder thickness: 4 mm
• Cylinder material: Brushed AISI 316 stainless steel
• Guided length: 400 mm (HRC)
• Impact resistance: 70,000 J
• Breakout resistance: 420,000 J
• Rising time: approx. 3.42 s
• Lowering time: approx. 3.20 s
• Piston stroke: 810 mm
• Power supply: 230 Vac 50 Hz
• Absorbed power: 1,100 W
• Hydraulic unit: TUNIT 3.20LP, 1 MPa (10 bar), 3 l reservoir
• Protection grade: IP67 (IP65 with pressure switch and solenoid valve)
• Duty: 2,000 cycles/day
• Working temperature: -20 ¡C to +80 ¡C (-40 ¡C with optional heater)
• Max static load (lowered): 20,000 kg
• Compatible ground pit: 9562L (H 1310 mm)