TALOS 94 Hydraulic Bollard 500x275mm

Fadini 9470L TALOS 94 Automatic Hydraulic Bollard - 700 mm x ¿275 mm

The Fadini 9470L is a TALOS 94 automatic hydraulic bollard rising 700 mm above ground, with a ¿275 mm x 4 mm powder-coated steel cylinder. When you need to decide who drives in - and stop everyone else - it gives you a physical barrier that rises on command and retracts fully when access is allowed.

The standard version keeps 200 mm of the raised cylinder guided inside the casing, giving 52,000 J impact resistance and 320,000 J breakout resistance. Raising takes about 3.00 s and lowering about 2.80 s from its 230 Vac oil-hydraulic unit, which sits at the top of the bollard so maintenance is straightforward. Once up, the cylinder is hydraulically locked; if the power fails, the supplied release key allows manual lowering. Twelve integrated LED lights and 80 mm retro-reflective film on the rubber-edged aluminium head make it easy to see, day or night.

Select the steel version at 700 mm and enjoy the peace of mind that comes with properly controlled vehicle access.

Key Features

• Fully retractable automatic hydraulic bollard, 700 mm above ground
• 200 mm guided length (standard version)
• Hydraulic locking in the raised position (fail secure as standard)
• Manual emergency lowering with the supplied release key
• Independent hydraulic power unit at the top of each bollard for easier maintenance
• Aluminium head with rubber edge, 12 integrated LED lights and 80 mm micro-prismatic retro-reflective film
• Hall-effect limit sensors and IP66 connector and junction box
• Rated for intensive use - 2,000 cycles per day
• Optional fail-safe 24 Vdc solenoid valve (9569L), obstacle detector (9568L), heater for -40 ¡C (9570L) and beeper (9567L)
• One Fadini control panel can manage up to four bollards simultaneously

Technical Specifications

• Part Number: 9470L
• Model: TALOS 94 automatic (oil-hydraulic)
• Height above ground: 700 mm
• Cylinder diameter: ¿275 mm
• Cylinder thickness: 4 mm
• Cylinder material: S235JRH steel, cataphoresis + RAL 1028 polyester powder coating
• Guided length: 200 mm
• Impact resistance: 52,000 J
• Breakout resistance: 320,000 J
• Rising time: approx. 3.00 s
• Lowering time: approx. 2.80 s
• Piston stroke: 710 mm
• Power supply: 230 Vac 50 Hz
• Absorbed power: 1,100 W
• Hydraulic unit: TUNIT 3.20LP, 1 MPa (10 bar), 3 l reservoir
• Protection grade: IP67 (IP65 with pressure switch and solenoid valve)
• Duty: 2,000 cycles/day
• Working temperature: -20 ¡C to +80 ¡C (-40 ¡C with optional heater)
• Max static load (lowered): 20,000 kg
• Weight complete with casing: 232 kg
• Compatible ground pit: 9560L (H 1010 mm)