TALOS 94 HRC Hydraulic Bollard 500x275mm

Fadini 9470HL TALOS 94 HRC Automatic Hydraulic Bollard - 700 mm x ¿275 mm

The Fadini 9470HL is the TALOS 94 HRC (High Resistance Cylinder) automatic hydraulic bollard, rising 700 mm above ground with a ¿275 mm x 4 mm powder-coated steel cylinder. Designed for residential, commercial, industrial and urban sites with many daily operations, it keeps unwanted vehicles out without holding up the traffic you want to let through.

As an HRC model, 400 mm of the raised cylinder stays guided inside the casing - twice the 200 mm of the standard version - lifting impact resistance to 70,000 J and breakout resistance to 420,000 J. Raising takes about 3.00 s and lowering about 2.80 s from its 230 Vac oil-hydraulic unit, which sits at the top of the bollard so maintenance is straightforward. Once up, the cylinder is hydraulically locked; if the power fails, the supplied release key allows manual lowering. Twelve integrated LED lights and 80 mm retro-reflective film on the rubber-edged aluminium head make it easy to see, day or night.

Specify the 9470HL for a 700 mm protective height and give your site dependable control over every vehicle that approaches.

Key Features

• Fully retractable automatic hydraulic bollard, 700 mm above ground
• 400 mm guided length (HRC) for higher impact and breakout resistance
• Hydraulic locking in the raised position (fail secure as standard)
• Manual emergency lowering with the supplied release key
• Independent hydraulic power unit at the top of each bollard for easier maintenance
• Aluminium head with rubber edge, 12 integrated LED lights and 80 mm micro-prismatic retro-reflective film
• Hall-effect limit sensors and IP66 connector and junction box
• Rated for intensive use - 2,000 cycles per day
• Optional fail-safe 24 Vdc solenoid valve (9569L), obstacle detector (9568L), heater for -40 ¡C (9570L) and beeper (9567L)
• One Fadini control panel can manage up to four bollards simultaneously

Technical Specifications

• Part Number: 9470HL
• Model: TALOS 94 HRC automatic (oil-hydraulic)
• Height above ground: 700 mm
• Cylinder diameter: ¿275 mm
• Cylinder thickness: 4 mm
• Cylinder material: S235JRH steel, cataphoresis + RAL 1028 polyester powder coating
• Guided length: 400 mm (HRC)
• Impact resistance: 70,000 J
• Breakout resistance: 420,000 J
• Rising time: approx. 3.00 s
• Lowering time: approx. 2.80 s
• Piston stroke: 710 mm
• Power supply: 230 Vac 50 Hz
• Absorbed power: 1,100 W
• Hydraulic unit: TUNIT 3.20LP, 1 MPa (10 bar), 3 l reservoir
• Protection grade: IP67 (IP65 with pressure switch and solenoid valve)
• Duty: 2,000 cycles/day
• Working temperature: -20 ¡C to +80 ¡C (-40 ¡C with optional heater)
• Max static load (lowered): 20,000 kg
• Weight complete with casing: 240 kg
• Compatible ground pit: 9561L (H 1210 mm)