BELL - 07 Call Button Flush Audio Entry Laser Cut Panel

Vandal resistant stainless steel audio door entry intercom panel

Please Note: This panel requires the Bell model: 61 speaker amplifier unit.

The LCP panel offers even greater protection than the VRP panels and will resist most attacks of vandalism. The front-plate consists of an overlapping bezel and a removable plate cut by a laser from the same sheet of 2.5 mm 316 marine grade stainless steel.

This leaves a gap of just 0.3 mm rejecting implements that could be used to force the panel from its box. The bezel is securely welded to the back-box providing an extremely strong fixing to the wall. The removable plate is fixed to the bezel and back box with countersunk A2 stainless steel security bolts requiring the use of a specialist tool for their removal (supplied).

A single stainless steel vandal resistant push-button (or brass button for brass panel) is provided for each station and optionally for Trades. These IP68 rated buttons are individually attached by means of a nut on the rear of the panel.

For each push-button a number or letter can be engraved on the panel for permanent identification. The engraving of flat numbers is included in the price but any further engraving, e.g. building names or instructions will incur a modest surcharge.

Custom layouts can include

• Custom engraving with numbers and text
• Trades facility
• Cut out for CCD camera
• Cut out for Proximity readers with stud fixings
• Keypads for access control

Technical Data

• 2.5mm marine grade stainless steel
• IP 68 rated call buttons