Alpro AL2002-0 Lipless 12/24V Fail Secure Monitored Strike

Alpro AL2002-0 Lipless monitored electric strike, 12/24VDC selectable, fail secure (PTO) operation. Features a compact 26mm shallow body depth with full monitoring including lock status sensor (LSS), door status sensor (DSS) and anti-tamper sensor (ATS). Stainless steel one-part body and striker for high security applications.

Designed for timber and metal door applications. The lipless version is used where no extension lip is required, typically on flush frame installations. Simple fail secure to fail safe changeover is achieved via the capstan wheel conversion mechanism. Pre-drilled strike body accepts extension lips if requirements change. Stick on/peel off template included for easy installation.

WARNING: This product is configured as fail secure (PTO) and must never be installed on Fire Exits or Emergency Exits. Incorrect installation may obstruct emergency escape and may result in injury or death.

About This Product

The Alpro AL2002-0 is a lipless variant of the AL2000 monitored electric strike, configured as fail secure (power to open). It is designed for installers fitting high-security electric strikes on timber or metal doors where the door must remain locked on power failure. The triple monitoring outputs (LSS, DSS and ATS) make it suitable for integration with access control and alarm systems. This product must not be used on fire or emergency exit doors.

Key Features

• Lipless design for flush frame installations
• 12/24VDC selectable voltage
• Fail secure (PTO) — convertible to fail safe (PTL) on site
• Triple monitoring: LSS, DSS and anti-tamper sensor
• Compact 26mm shallow body depth
• Stainless steel one-part body and striker
• Weather resistant
• Pre-drilled for extension lips (15mm, 25mm, 50mm, 75mm available separately)

Technical Specifications

• Voltage: 12VDC/24VDC selectable
• Current Draw (12VDC): 220mA (+/-15%) continuous
• Current Draw (24VDC): 110mA (+/-15%) continuous
• Function: Fail Secure / PTO (convertible to PTL)
• Body Depth: 26mm
• Latch Bolt Acceptance: 15mm with 3mm door gap
• LSS Output: 3A 125VAC / 2A 30VDC
• DSS Output: 3A 125VAC / 2A 30VDC
• ATS Output: 5A 125VAC / 3A 250VAC
• Body Dimensions: 175 x 123 x 38mm
• Compliance: EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU
• Guarantee: 6 Years

Common Questions

• Can this be converted to fail safe? Yes, the AL2002-0 can be converted to fail safe (PTL) on site using the capstan wheel conversion mechanism.
• Can extension lips be added later? Yes, the strike body is pre-drilled to accept 15mm, 25mm, 50mm or 75mm extension lips (ordered separately).
• Can this be used on fire exits? No. Fail secure strikes must never be installed on fire exits or emergency exits.

Compatibility

• ALEX2015 — 15mm Extension Lip
• ALEX2025 — 25mm Extension Lip
• ALEX2050 — 50mm Extension Lip
• ALEX2075 — 75mm Extension Lip
• IEC-RM1 — Rectifier Sounder Module (for AC operation)
• Timber and metal door frames

Dimensions
• 175 x 123 x 38mm (H x W x D)