Fadini VIGILO Automatic Hydraulic Bollard 600mm, S. Steel, No Casing

Fadini 2273WL VIGILO 600 mm Automatic Hydraulic Bollard, ¿200 mm, AISI 304 Stainless Steel - Supplied Without Casing

Fadini's VIGILO 2273WL automatic hydraulic bollard rises 600 mm from the ground on a heavy-duty ¿200 mm brushed AISI 304 stainless steel cylinder. If vehicles are cutting through, parking where they shouldn't or entering without permission, it gives you a clear physical barrier that retracts fully for authorised traffic on residential, commercial and industrial sites.

Because the motor-pump and actuator sit inside the bollard itself and the unit is lightweight, the pit needs no special excavation or brickwork. Once raised, VIGILO is held by oil-hydraulic locking, travel is managed by Hall-effect limit switches and it rises in approximately 5.9 s. In a power failure it can be lowered manually with the release spanner supplied; a solenoid valve version is available where automatic lowering is preferred. The brushed stainless finish is topped with an aluminium head and rubber edge guard. Supplied without foundation casing - order ground pit 2246L separately.

With 30,000 J impact resistance and 160,000 J breakout resistance, VIGILO lets you protect your site with confidence. Select the 600 mm height that suits your entrance and run several bollards from one control unit.

Key Features

• Brushed AISI 304 stainless steel cylinder
• Supplied without foundation casing - ground pit ordered separately
• Fully retractable oil-hydraulic operation, 230 Vac
• Hydraulic locking in the raised position; release spanner supplied for manual emergency lowering
• Motor-pump and actuator housed inside the bollard
• Lightweight design - pit needs no special excavation or brickwork
• Hall-effect limit switches
• Heavy-duty use: up to 2,000 cycles per day
• Cold-climate accessories (2590L) allow operation down to -40 ¡C

Technical Specifications

• Part Number: 2273WL
• Product type: Automatic retractable oil-hydraulic bollard
• Range: Fadini VIGILO
• Height from ground: 600 mm
• Cylinder diameter: ¿200 mm
• Cylinder thickness: 4 mm
• Cylinder material: AISI 304 stainless steel
• Finish: Brushed stainless steel
• Foundation casing (ground pit): Not included - order 2246L
• Rising time: approx. 5.9 s
• Power supply: 230 Vac 50 Hz (±10%)
• Absorbed power: 330 W
• Absorbed current: 1.8 A
• Power output: 0.25 kW (0.33 HP)
• Motor-pump protection: IP67
• Frequency of use: Heavy duty, 2,000 cycles/day
• Impact resistance: 30,000 J
• Breakout resistance: 160,000 J
• Max static load (lowered): 20,000 kg
• Working temperature: -20 ¡C to +80 ¡C (-40 ¡C with cold-climate accessories)
• Hydraulic oil: Fadini 708L
• Emergency lowering: Manual with release spanner