Fadini VIGILO Automatic Hydraulic Bollard 500mm, No Casing

Fadini 2250WL VIGILO 500 mm Automatic Hydraulic Bollard, ¿200 mm - Supplied Without Casing

The Fadini VIGILO 2250WL is a fully retractable, oil-hydraulic automatic rising bollard with a wide ¿200 mm body that stands 500 mm above ground on a powder-coated steel cylinder. It is designed for residential, commercial and industrial sites where you need to stop unauthorised vehicles without slowing down the people who are allowed in.

Because the motor-pump and actuator sit inside the bollard itself and the unit is lightweight, the pit needs no special excavation or brickwork. Once raised, VIGILO is held by oil-hydraulic locking, travel is managed by Hall-effect limit switches and it rises in approximately 5.1 s. In a power failure it can be lowered manually with the release spanner supplied; a solenoid valve version is available where automatic lowering is preferred. The S235JRH steel cylinder is cataphoresis treated and polyester powder coated in RAL 7016, with an aluminium head and rubber edge guard. Supplied without foundation casing - order ground pit 2245L separately.

The result is a secure, low-hassle entrance that keeps working - VIGILO is rated for up to 2,000 cycles a day. Choose this 500 mm version to suit your site; one control unit can manage several bollards.

Key Features

• Supplied without foundation casing - ground pit ordered separately
• Fully retractable oil-hydraulic operation, 230 Vac
• Hydraulic locking in the raised position; release spanner supplied for manual emergency lowering
• Motor-pump and actuator housed inside the bollard
• Lightweight design - pit needs no special excavation or brickwork
• Hall-effect limit switches
• Heavy-duty use: up to 2,000 cycles per day
• Aluminium head with rubber edge guard
• Cold-climate accessories (2590L) allow operation down to -40 ¡C

Technical Specifications

• Part Number: 2250WL
• Product type: Automatic retractable oil-hydraulic bollard
• Range: Fadini VIGILO
• Height from ground: 500 mm
• Cylinder diameter: ¿200 mm
• Cylinder thickness: 4 mm
• Cylinder material: S235JRH steel
• Finish: Cataphoresis + polyester powder coating, RAL 7016
• Foundation casing (ground pit): Not included - order 2245L
• Rising time: approx. 5.1 s
• Power supply: 230 Vac 50 Hz (±10%)
• Absorbed power: 330 W
• Absorbed current: 1.8 A
• Power output: 0.25 kW (0.33 HP)
• Motor-pump protection: IP67
• Frequency of use: Heavy duty, 2,000 cycles/day
• Impact resistance: 30,000 J
• Breakout resistance: 160,000 J
• Max static load (lowered): 20,000 kg
• Working temperature: -20 ¡C to +80 ¡C (-40 ¡C with cold-climate accessories)
• Hydraulic oil: Fadini 708L
• Emergency lowering: Manual with release spanner