Videx 2 Code, 2 Relay, Standalone/Networkable Codelock (Stainless)

*** This product has been superceded and replaced by 4903/M ***

Videx 4903 2 Code, 2 Relay, Modular 4000 Series Standalone or Networkable (RS485) Codelock Module or the GSMPRO Intercom with Blue Backlit Key Buttons (Stainless Steel Finish)

The Videx 4903 4000 series codelock module with blue backlit buttons can operate as a standalone codelock or be networked via an RS485 bus. It can be networked with the GSMPRO (4810) audio module (as well as other 4903 keypads and 4850R proximity readers).

This codelock has 2 relays and allows for 2 codes (1 code per relay) when in standalone mode, however when connected via the RS485 bus to the GSMPRO audio module access codes can be expanded up to 400 permanent codes or 32 temporary codes that can be assigned to one or both of the relays.

This keypad has dry relay contacts (CO, NO and NC) where each output can be programmed from 1-99 seconds or set to 00 for latching. It also features two switched 0V push to exit inputs to activate relays 1 and 2 respectively. Codes can be between 4-8 digits in length.

This variation comes with a stainless steel finish.

Features:

• Module Size: One Module
• Backlit Key Buttons (blue): 1 - 9, ENTER (ARROW), 0 and CLEAR (X)
• 2 Codes, 2 Relays
• Stainless Steel Finish
• Modules are compatible with both surface and flush 4000 series back boxes
• Can operate as standalone keypad, also networkable via RS485
• User friendly programming menu with audible reassurance tones

Technical Specifications:

• Modular 4000 Series
• Indication LEDs: green LED = data, red LED = prog. & status indication
• Standalone Operation & Programming: 2 codes, 2 relays (RLY1 and RLY2), 1 code per relay, each code between 4 - 8 digits, standalone programming inc. relay times (1 - 99 secs or 00 latch) via key buttons. Unit ID (1 - 8) programming via key buttons
• Networked Operation & Programming: networked via RS485 BUS with 4810 GSM PRO module. Program up to 400 permanent codes, up to 32 temporary codes (including access control timebands and access levels), codes assigned to one or both relays
• Programming Method: Networked with 4810 GSM PRO: text message, PC software (GSMSK) or via Videx GSM Mobile App (SMS Wizard)
• RS485 BUS: RS485 BUS connection: A and B , for network connection with 4810 GSM PRO module
• RS485 Termination: RS485 BUS termination jumper JP1 (JP1 left pos. = termination ON, JP1 right pos. = termination OFF)
• Relay Contacts: 2 Dry Contact Relays: RLY1 = C1/NO1/NC1, RLY2 = C2/NO2/NC2
• Relay Voltage / Amps: Dry Contact Voltage/Current Rating: 24Vac/dc 3A max.
• Back EMF Protection: 2 x selectable MOV jumpers to enable/disable back EMF protection, JP2 and JP3, one per relay
• PTE Inputs: 2 x switched 0V inputs (push-to-make), SW1 (for RLY1) and SW2 (for RLY2)
• Working Voltage: 12-24Vac or dc (compatible with PSUs 321, 322 and HRD-15-12
• Power Consumption: Stand-by: 20mA / During Operation: 70mA (max.)
• Working Temperature (C): -10 to +50

Dimensions:

• 103 x 120 x 30 (wld mm)