TALOS M30 automatic w/o casing

Fadini 9682WL TALOS M30 Automatic Anti-Ram Hydraulic Bollard - 800 mm x ¿275 mm, without Casing

Supplied without foundation casing, the Fadini 9682WL TALOS M30 is a fully retractable, heavy-duty automatic anti-ram bollard, 800 mm high with a ¿275 mm x 12 mm S355J2H steel cylinder. It is designed for traffic control and the protection of sensitive areas that need high perimeter security - where the thought of a vehicle being driven at your site is a risk you cannot accept.

Designed to ASTM F2656-07, PAS 68:2013 and IWA 14-1 to stop a 6.8 t vehicle at 50 km/h, it offers 150,000 J impact resistance and 700,000 J breakout resistance. In everyday use it rises in about 4.5 s and lowers in about 3.42 s at 230 Vac, is hydraulically locked when raised, and can be lowered manually in an emergency with the supplied release spanner, protected by a burglar-proof cover plate. Please note this version is supplied without the foundation casing.

Order the casing-free 9682WL where your project calls for the bollard only, and get the same tested M30 protection.

Key Features

• Designed to ASTM F2656-07, PAS 68:2013 and IWA 14-1 - stops a 6.8 t vehicle at 50 km/h
• Fully retractable oil-hydraulic operation
• Hydraulic locking in the raised position
• Emergency manual lowering with supplied release spanner
• Burglar-proof cover plate blocks access to the release system
• 12 mm S355J2H steel cylinder, cataphoresis + RAL 7016 coating; optional AISI 304 stainless sleeve
• Aluminium head with rubber edge and integrated amber LEDs
• Hall-effect limit switches and IP66 connector/junction box
• Optional heater for operation down to -40 ¡C

Technical Specifications

• Part Number: 9682WL
• Model: TALOS M30 automatic
• Height above ground: 800 mm
• Cylinder diameter: ¿275 mm
• Cylinder thickness: 12 mm
• Cylinder material: S355J2H steel, cataphoresis + RAL 7016
• Vehicle stopping performance: 6.8 t at 50 km/h (ASTM F2656-07, PAS 68:2013, IWA 14-1)
• Impact resistance: 150,000 J
• Breakout resistance: 700,000 J
• Rising time: approx. 4.5 s
• Lowering time: approx. 3.42 s
• Piston stroke: 810 mm
• Power supply: 230 Vac 50 Hz
• Absorbed power: 1,100 W
• Rated current: 1.8 - 3.5 A (max 6 A)
• Hydraulic unit: TUNIT 3.20LP, 10 bar, 3 l, IP67
• Duty: 2,000 cycles/day
• Working temperature: -20 ¡C to +80 ¡C (-40 ¡C with optional heater)
• Max static load: 20,000 kg
• Supplied: Without foundation casing