Fadini MEC 200 LB 1.5HP 3-Phase Chain-Drive Industrial Door Operator

Fadini 2058L MEC 200 LB 1.5 HP Three-Phase Chain-Drive Industrial Door Operator

The Fadini MEC 200 LB 1.5 HP three-phase is the top-power chain-drive operator in the MEC 200 LB range, with 110 Nm of rated torque for industrial, sectional and folding doors up to 50 m2. It is built for the heaviest doors on 230/400 Vac sites, where downtime costs money.

Drive comes from a worm gear with bronze crown gear running in an oil bath on ball bearings, transmitted to the door by chain. Torque is set with a mechanical clutch and the opening and closing limits are set mechanically, so commissioning is straightforward. With the reference Z20 1/2" pinion the door travels at 9.6 m/min, and if the power fails a release lever with metal cable lets you operate it by hand, reset with a key.

Choose this MEC 200 LB version to match your door size and supply for a door that simply works.

Key Features

• Chain drive for sectional, folding and industrial doors
• Worm gear with bronze crown gear in an oil bath on ball bearings
• Torque adjusted by mechanical clutch
• Opening and closing limit positions set mechanically
• Manual override by release lever with metal cable, reset with key
• Wide range of Fadini accessories for a complete installation

Technical Specifications

• Part Number: 2058L
• Product type: Electromechanical chain-drive operator for industrial doors
• Motor: 1.5 HP three-phase
• Power supply: 230/400 Vac 50 Hz three-phase
• Absorbed power: 1,500 W
• Absorbed current: 5.1/3 A
• Power yield: 1.1 kW
• Rated torque: 110 Nm
• Gear ratio: 1/32
• Travel speed: 9.6 m/min (with Z20 1/2" pinion)
• Max door surface: 50 m2
• Limit switch: Mechanical
• IP rating: IP55
• Oil type: 706L
• Working temperature: -20 to +80 ¡C
• Weight: 25 kg
• Frequency of use: Intensive