Fadini MEC 200 1.5HP 3-Phase Sliding Gate Motor, Vertical Pinion

Fadini MEC 200 1.5 HP Three-Phase Industrial Sliding Gate Motor

Fitted with a vertical pinion, the Fadini F/213L is the most powerful version in the MEC 200 sliding gate motor line-up, with 110 Nm of rated torque for industrial gates up to 2,000 kg. This model is for large, heavily used gates where an undersized motor would mean breakdowns and a site entrance you cannot trust. Fadini offers vertical and horizontal pinion versions so the operator can match the way the rack is fixed to your gate.

Inside, a worm and bronze crown gear in an oil bath on ball bearings drives the pinion, while the aluminium gearbox and cover are built for a long working life. A mechanical clutch lets you adjust the torque to the gate, and if the power is off the E17 spanner (supplied) frees the gate to be moved by hand. The gate travels at 10 m/min with 110 Nm of rated torque from a 1.1 kW motor.

Fadini recommends a voltage cut-off microswitch on three-phase operators, which cuts power when the release spanner is inserted or the cover is removed. Select the vertical pinion version to suit your rack and enjoy a gate that opens and closes reliably, shift after shift.

Key Features

• Vertical pinion version to suit how the rack is fixed to the gate
• Worm and bronze crown gear coupling in an oil bath on ball bearings
• Aluminium gearbox and cover; pressure-cast aluminium base plate
• Torque adjustable via mechanical clutch with grease-lubricated clutch discs
• Manual release with E17 spanner (supplied)
• Very intensive duty: S3 intermittent service, approx. 33 cycles/hour
• Voltage cut-off microswitch recommended by Fadini for three-phase operators

Dimensions

• 290 x 285 x 467 (hwd mm)

Technical Specifications

• Product type: Electromechanical sliding gate operator (geared motor)
• Motor: 1.5 HP three-phase
• Pinion: Vertical
• Power supply: 230/400 Vac 50 Hz three-phase
• Absorbed power: 1,500 W
• Absorbed current: 5.1/3 A
• Power yield: 1.1 kW
• Motor revolutions: 1,380 rpm
• Rated torque: 110 Nm
• Travel speed: 10 m/min
• Gear ratio: 1/32
• Max gate weight: 2,000 kg
• Weight: 25 kg
• Limit switch: Mechanical
• IP rating: IP55 (inside cover)
• Oil type: 706L
• Working temperature: -25 to +80 degrees C
• Duty: Very intensive - S3 intermittent service, approx. 33 cycles/hour