Fadini MEC 200 0.5HP 3-Phase Sliding Gate Motor, Vertical Pinion

Fadini 211L MEC 200 0.5 HP Three-Phase Sliding Gate Motor, Vertical Pinion - Gates up to 1,250 kg

Fitted with a vertical pinion, the Fadini MEC 200 0.5 HP three-phase sliding gate motor is an industrial electromechanical operator for gates up to 1,250 kg on a 230/400 Vac supply. It is the entry point to the MEC 200 range for commercial and industrial sites that need a tough, very intensive-duty operator rather than a light residential motor. Fadini offers vertical and horizontal pinion versions so the operator can match the way the rack is fixed to your gate.

The MEC 200 is built around a worm and bronze crown gear in an oil bath on ball bearings, sealed in an aluminium gearbox and cover. The mechanical clutch is adjustable to suit the gate, its discs lubricated with multifunctional grease, and manual release is by the E17 spanner supplied with the operator. The gate travels at 10 m/min with 40 Nm of rated torque from a 0.37 kW motor.

Fadini recommends a voltage cut-off microswitch on three-phase operators, which cuts power when the release spanner is inserted or the cover is removed. Choose the vertical pinion MEC 200 that matches your rack fixing for a strong, dependable gate that keeps the site moving.

Key Features

• Vertical pinion version to suit how the rack is fixed to the gate
• Worm and bronze crown gear coupling in an oil bath on ball bearings
• Aluminium gearbox and cover; pressure-cast aluminium base plate
• Torque adjustable via mechanical clutch with grease-lubricated clutch discs
• Manual release with E17 spanner (supplied)
• Very intensive duty: S3 intermittent service, approx. 33 cycles/hour
• Voltage cut-off microswitch recommended by Fadini for three-phase operators

Technical Specifications

• Part Number: 211L
• Product type: Electromechanical sliding gate operator (geared motor)
• Motor: 0.5 HP three-phase
• Pinion: Vertical
• Power supply: 230/400 Vac 50 Hz three-phase
• Absorbed power: 575 W
• Absorbed current: 2.1/1.2 A
• Power yield: 0.37 kW
• Motor revolutions: 1,380 rpm
• Rated torque: 40 Nm
• Travel speed: 10 m/min
• Gear ratio: 1/32
• Max gate weight: 1,250 kg
• Weight: 18 kg
• Limit switch: Mechanical
• IP rating: IP55 (inside cover)
• Oil type: 706L
• Working temperature: -25 to +80 ¡C
• Duty: Very intensive - S3 intermittent service, approx. 33 cycles/hour