We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Fadini MEC 200 0.5HP Single-Phase Sliding Gate Motor, Vertical Pinion
SKU
F/2114L
- This product is available to order. The lead time is normally 1 – 3 working days.
- An accurate despatch date will be confirmed with you once order is received by our sales team (during office hours).
Free Delivery on this product
Fadini F/2114L MEC 200 0.5 HP Single-Phase Sliding Gate Motor with Vertical Pinion for Gates up to 1,200 kg
Fadini MEC 200 0.5 HP Single-Phase Industrial Sliding Gate Motor
Fitted with a vertical pinion, the Fadini F/2114L is an industrial electromechanical sliding gate operator for gates up to 1,200 kg on a 230 Vac supply. It is the entry point to the MEC 200 range for commercial and industrial sites that need a tough, very intensive-duty operator rather than a light residential motor. Fadini offers vertical and horizontal pinion versions so the operator can match the way the rack is fixed to your gate.
Inside, a worm and bronze crown gear in an oil bath on ball bearings drives the pinion, while the aluminium gearbox and cover are built for a long working life. A mechanical clutch lets you adjust the torque to the gate, and if the power is off the E17 spanner (supplied) frees the gate to be moved by hand. The gate travels at 10 m/min with 40 Nm of rated torque from a 0.37 kW motor.
Select the vertical pinion version to suit your rack and enjoy a gate that opens and closes reliably, shift after shift.
Key Features
- Vertical pinion version to suit how the rack is fixed to the gate
- Worm and bronze crown gear coupling in an oil bath on ball bearings
- Aluminium gearbox and cover; pressure-cast aluminium base plate
- Torque adjustable via mechanical clutch with grease-lubricated clutch discs
- Manual release with E17 spanner (supplied)
- Very intensive duty: S3 intermittent service, approx. 33 cycles/hour
Dimensions
- 290 x 285 x 467 (hwd mm)
Technical Specifications
- Product type: Electromechanical sliding gate operator (geared motor)
- Motor: 0.5 HP single-phase
- Pinion: Vertical
- Power supply: 230 Vac 50 Hz single-phase
- Absorbed power: 510 W
- Absorbed current: 2.4 A
- Power yield: 0.37 kW
- Capacitor: 20 uF
- Motor revolutions: 1,380 rpm
- Rated torque: 40 Nm
- Travel speed: 10 m/min
- Gear ratio: 1/32
- Max gate weight: 1,200 kg
- Weight: 19 kg
- Limit switch: Mechanical
- IP rating: IP55 (inside cover)
- Oil type: 706L
- Working temperature: -25 to +80 degrees C
- Duty: Very intensive - S3 intermittent service, approx. 33 cycles/hour
| Brand | Fadini |
|---|
More from Fadini
