Fadini JUNIOR 624 24V Sliding Gate Motor with Encoder

Fadini 624L Junior 624 24 V Sliding Gate Motor with Encoder - Gates up to 400 kg

The Fadini Junior 624 is a 24 V electromechanical sliding gate motor for residential gates weighing up to 400 kg. If your driveway gate is sluggish, unreliable or simply still opened by hand, the Junior 624 gives you smooth, controlled automation that you can depend on every day.

Its 24 V motor drives the gate at up to 12 m/min through a worm and plastic crown gear running in an oil bath on ball bearings. An encoder works with amperometric obstacle detection to reverse the gate if it meets an obstacle, while electronic braking slows the gate at the end of each opening and closing. Travel is set with one button, a magnetic limit switch defines the stops, and the operator is preset for battery backup so the gate can keep working through a power failure.

Choose the Junior 624 for a quiet, low-voltage residential installation that simply gets on with the job.

Key Features

• Encoder plus amperometric obstacle detection reverses the gate if it meets an obstacle
• Electronic braking with slowdown in both opening and closing
• Acceleration and deceleration on every cycle; travel programmed with a single button
• Worm and plastic crown gear running in an oil bath on ball bearings
• Magnetic limit switch
• Manual release via aluminium handle with key
• Blue LED on the cover shows the automation status
• D.A.C.S. safety edge self-test, D.S.A. safety self-test and RT DATA logic
• Master/slave option for double bi-parting sliding gates (ELPRO 64)
• Preset for battery backup in case of power failure

Technical Specifications

• Part Number: 624L
• Product type: Electromechanical sliding gate operator (geared motor)
• Max gate weight: 400 kg
• Power supply: 230 Vac 50 Hz
• Motor voltage: 24 V
• Max absorbed power: 220 W
• Max absorbed current: 6.3 A
• Max thrust: 400 N
• Motor revolutions: 3,000 rpm
• Travel speed: 12 m/min
• Gear ratio: 1:61
• Gearing: Worm and plastic crown gear in oil bath on ball bearings
• Limit switch: Magnetic
• IP rating: IP54
• Oil type: 706L
• Working temperature: -20 to +50 ¡C
• Weight: 11 kg
• Frequency of use: Intensive
• Control unit: ELPRO 64 (current Junior series, July 2022 onwards)