We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Fermax DUOX PLUS Floor Decoder/Isolator with 10 Outputs
£151.68
£126.40
SKU
F-9419
- This product is available to order. The lead time is normally 2 – 4 working days.
- An accurate despatch date will be confirmed with you once order is received by our sales team (during office hours).
Free Delivery on this product
Fermax F-9419 DUOX PLUS 10-Output Decoder/Isolator with short-circuit protection and remote programming
Fermax F-9419 DUOX PLUS 10-Output Floor Decoder and Isolator
The Fermax F-9419 is a 10-output floor decoder/isolator for the DUOX PLUS 2-wire door entry system. It provides one output per dwelling with a maximum of 3 monitors or telephones per output, enabling extended derivation distances of up to 100m per output while isolating each dwelling against short circuits and signal reflections.
If a short circuit or overconsumption is detected on any output, that output is isolated from the rest of the installation. The DUOX PLUS bus and all remaining outputs continue to operate normally, indicated by a red LED on the affected output.
The decoder supports remote terminal programming via onboard dipswitches, eliminating the need to enter individual dwellings. Addresses can be programmed sequentially or in open (non-sequential) mode. After remote programming, the decoder automatically locks the Installer Menu on connected monitors (V42.18 or higher), preventing end users from modifying installer parameters. The menu can be temporarily unlocked and will re-lock after 30 minutes.
Powered directly from the DUOX PLUS bus with no additional power supply required. Features removable terminal strips for ease of installation. Multiple decoders can be installed per floor as needed.
Key Features
- 10 isolated outputs, 1 per dwelling
- Up to 3 terminals (monitors/telephones) per output
- Up to 100m derivation distance per output
- Short-circuit protection per output with red LED indicator
- Remote terminal programming via dipswitches (no dwelling access needed)
- Sequential or open (non-sequential) programming modes
- Automatic Installer Menu lock on monitors (V42.18+)
- Powered directly from DUOX PLUS bus
- Removable terminal strips
- DIN 10 rail or screw-fix mounting
Technical Specifications
- System: DUOX PLUS
- Number of outputs: 10
- Max terminals per output: 3
- Max derivation distance per output: 100m
- Power source: DUOX PLUS bus (no additional PSU required)
- Supply voltage: 24Vdc (from bus)
- Idle consumption: 828mW
- Maximum consumption: 864mW
- Short-circuit protection: Yes, per output with red LED
- Programming: Dipswitches (sequential or open mode)
- Mounting: DIN 10 rail or screw fixing
Dimensions
- 90 x 175 x 37 mm (H x W x D)
| Brand | Fermax |
|---|---|
| Audio or Video | Video |
| Product Type | Relay (system specific) |
More from Fermax
