ELPRO S50-T2.EFO control panel

Fadini 9094L ELPRO S50-T2.EFO Control Unit for TALOS M50 Automatic Bollards, 230 V Single-Phase

The Fadini ELPRO S50-T2.EFO is the largest-housed version of the ELPRO S50 control unit for the TALOS M50 automatic bollard. Supplied for 230 Vac single-phase power, it controls up to four bollards with a motor maximum of 3,500 W from one panel.

The T2.EFO version comes in a 405 x 650 x 200 mm box rated IP66, the tallest enclosure in the S50 range. Operating modes include automatic, semiautomatic, automatic step-by-step, deadman control, pedestrian (single bollard) and pre-flashing, with settings made by trimmers and dip-switches. The unit is preset for an external clock, takes a traffic light card and a plug-in radio receiver card, and provides bollard status indication plus C.S.I. (Control of the System Integrity).

Select the S50-T2.EFO where your TALOS M50 specification calls for this version and keep vehicle access firmly under control.

Key Features

• Operating modes: automatic, semiautomatic, automatic step-by-step, deadman control, pedestrian (single bollard) and pre-flashing
• Controls up to four automatic bollards
• Adjustment by trimmers and dip-switches
• Preset for external clock
• Traffic light card and plug-in radio receiver card
• Bollard status indication
• C.S.I. (Control of the System Integrity)
• 230 Vac single-phase supply
• 405 x 650 x 200 mm IP66 box

Technical Specifications

• Part Number: 9094L
• Compatible with: Fadini TALOS M50 automatic bollard
• Bollards controlled: Up to 4
• Single-phase supply: 230 Vac, 50 Hz
• Motor max. power: 3,500 W
• Photocells/key-switch/receiver output: 24 Vdc, 250 mA
• Pilot light output: 24 Vac, 3 W
• Flashing light output: 230 Vac, 100 W
• Movement beeper output: 230 Vac, 100 W
• Solenoid valve supply: 230 Vac, 50 Hz
• Motor run time: 1-22 s
• Dwell time: 1-180 s
• Box dimensions: 405 x 650 x 200 mm
• Protection grade: IP66
• Working temperature: -20 ¡C to +55 ¡C