ELPRO S50-T1 control panel

Fadini 9097L ELPRO S50-T1 Control Unit for TALOS M50 Automatic Bollards, 230 V Single-Phase

The Fadini ELPRO S50-T1 is the compact version of the ELPRO S50 electronic control unit for the TALOS M50 automatic bollard. Running on a 230 Vac single-phase supply and handling up to four bollards with a motor maximum of 3,500 W, it gives sites protecting vehicle entrances one dependable point of control.

The S50-T1 comes in a 310 x 425 x 160 mm IP66 box, the smallest of the S50 range. Operating modes include automatic, semiautomatic, automatic step-by-step, deadman control, pedestrian (single bollard) and pre-flashing, with settings made by trimmers and dip-switches. The unit is preset for an external clock, takes a traffic light card and a plug-in radio receiver card, and provides bollard status indication plus C.S.I. (Control of the System Integrity).

Pick the S50-T1 when your TALOS M50 installation needs a single-phase controller in the most compact S50 housing.

Key Features

• Operating modes: automatic, semiautomatic, automatic step-by-step, deadman control, pedestrian (single bollard) and pre-flashing
• Controls up to four automatic bollards
• Adjustment by trimmers and dip-switches
• Preset for external clock
• Traffic light card and plug-in radio receiver card
• Bollard status indication
• C.S.I. (Control of the System Integrity)
• 230 Vac single-phase supply
• Compact 310 x 425 x 160 mm IP66 box

Technical Specifications

• Part Number: 9097L
• Compatible with: Fadini TALOS M50 automatic bollard
• Bollards controlled: Up to 4
• Single-phase supply: 230 Vac, 50 Hz
• Motor max. power: 3,500 W
• Photocells/key-switch/receiver output: 24 Vdc, 250 mA
• Pilot light output: 24 Vac, 3 W
• Flashing light output: 230 Vac, 100 W
• Movement beeper output: 230 Vac, 100 W
• Solenoid valve supply: 230 Vac, 50 Hz
• Motor run time: 1-22 s
• Dwell time: 1-180 s
• Box dimensions: 310 x 425 x 160 mm
• Protection grade: IP66
• Working temperature: -20 ¡C to +55 ¡C