Fadini CORAL Automatic Hydraulic Bollard 600mm, Without Casing

Fadini 1059WL CORAL 600 mm Automatic Hydraulic Bollard, ¿100 mm - Supplied Without Casing

Fadini's CORAL 1059WL automatic hydraulic bollard rises 600 mm from the ground on a heavy-duty ¿100 mm powder-coated steel cylinder. If vehicles are cutting through, parking where they shouldn't or entering without permission, it gives you a clear physical barrier that retracts fully for authorised traffic on residential, commercial and industrial sites.

The motor-pump and actuator are housed inside the bollard, protecting them from corrosion and making maintenance easier, and the lightweight design means the shallow pit needs no special excavation or brickwork. The bollard is locked hydraulically when raised, Hall-effect limit switches control its travel and it rises in approximately 5.6 s. In a power failure it can be lowered manually with the release key supplied; a solenoid valve version is available where automatic lowering is preferred. Supplied without foundation casing - order ground pit 1076L separately.

With 30,000 J impact resistance and 150,000 J breakout resistance, you can be confident your entrance is protected. Choose this 600 mm CORAL to suit your site, and control several bollards from a single Fadini control unit.

Key Features

• Supplied without foundation casing - ground pit ordered separately
• Fully retractable oil-hydraulic operation, 230 Vac
• Hydraulic locking in the raised position; release key supplied for manual emergency lowering
• Motor-pump and actuator housed inside the bollard
• Lightweight design - pit needs no special excavation or brickwork
• Hall-effect limit switches
• Heavy-duty use: up to 2,000 cycles per day
• Cold-climate accessories (2590L) allow operation down to -40 ¡C

Technical Specifications

• Part Number: 1059WL
• Product type: Automatic retractable oil-hydraulic bollard
• Range: Fadini CORAL
• Height from ground: 600 mm
• Cylinder diameter: ¿100 mm
• Cylinder thickness: 5 mm
• Cylinder material: S235JRH steel
• Finish: Cataphoresis + polyester powder coating, RAL 7016
• Foundation casing (ground pit): Not included - order 1076L
• Rising time: approx. 5.6 s
• Power supply: 230 Vac 50 Hz
• Absorbed power: 330 W
• Absorbed current: 1.8 A
• Power output: 0.25 kW (0.33 HP)
• Motor-pump protection: IP67
• Frequency of use: Heavy duty, 2,000 cycles/day
• Impact resistance: 30,000 J
• Breakout resistance: 150,000 J
• Max static load (lowered): 20,000 kg
• Working temperature: -20 ¡C to +80 ¡C (-40 ¡C with cold-climate accessories)
• Hydraulic oil: Fadini 708L
• Emergency lowering: Manual with release key