Comelit 1468 VLAN Routing Interface for ViP System

Comelit 1468 VLAN Routing Interface for ViP Door Entry Systems

The Comelit 1468 is a VLAN routing interface module that enables Comelit ViP door entry devices installed on separate VLANs to communicate with each other. One 1468 device is required per VLAN. For remote network installations across different sites, a third-party VPN connection is required.

The module features four Ethernet ports with configurable PoE on two ports, DIN rail mounting in a compact 4-module width, and is configured using the free ViP Manager software (version 2.8.1 or later). Network reset and factory reset procedures are available via onboard DIP switches.

Key Features

• Inter-VLAN routing for ViP system communications
• 4 Ethernet ports: A1 fixed PoE, A2 and A3 settable PoE, A4 no PoE (for PC/router)
• DIN rail mounting, 4 modules wide
• Static IP address configuration required
• Supports local VLAN and remote VPN network topologies
• Configured via free ViP Manager software (v2.8.1+)
• Network reset and factory reset via DIP switches
• Powered via Art. 1441 or Art. 1441B power supply

Technical Specifications

• System: Comelit ViP
• Supply voltage: 48 to 56 VDC
• Current draw: 50 mA
• Operating temperature: +5 to +40 degrees C
• Operating humidity: 25 to 75% RH
• Protection class: IP30
• Default IP address: 192.168.1.100
• Default netmask: 255.255.255.0
• Mounting: DIN rail
• DIN modules: 4
• Ethernet ports: 4 (A1 PoE fixed, A2/A3 PoE settable via jumpers, A4 no PoE)
• PoE limitation with Art. 1440: only port A1 operates as PoE
• Required cable: Comelit red cable Art. 1449 for router/PC connection