Comelit Simplehome Module Logic Functions

Comelit Simplehome Module Logic Functions

The logic functions module 20002710, connected to the SimpleHome system, can be used to carry out actions on the basis of whether certain conditions are detected or not.

Rules can be created with up to 100 conditions, linked with AND or OR operators. Rules can be created using the result of other rules as conditions.

The status of an ON/OFF input or output or of an analogue input or output, the exceeding of a temperature value, the setting of a specific operating mode for the heating or air conditioning system, etc. can be set as rule conditions. You can set the commands to be executed if the rule is confirmed and other commands to be executed if the rule is not confirmed, up to a maximum of 100 commands.

Features:

• Flush-mounted
• DIN rail mounted
• Automation management
• Loads management
• Climate management
• Lights management
• Scenario management
• Integrated temperature sensor

Technical Specifications:

• DIN modules: 1
• Number of Simplehome buses: 1
• Home Automation system
• Operating temperature (C): -10 Ö 40

Dimensions:

• 42 x 42 x 18 (hwd mm)