BPT Fadini F/7417748LH | COMBI 740 110 Degree Left Hand Locking

BPT Fadini F/7417748LH | COMBI 740 110 Degree Left Hand Locking

The COMBI 740 operator for swinging gates is designed for below-ground installation and to be positioned at the foot of the gate, perpendicular to the hinge supporting the gate to be opened.

Compact design for easy installation

The all-in-one unit incorporating the basic enclosure and the hydraulic jack pump/motor set has been specifi cally designed for problem-free installation. The mechanism is supplied fully functional and no adjustment or hydraulic oil top-ups are necessary. The enclosure is sunk in concrete next to the pillar, ensuring that the surface edge is perfectly horizontally aligned and on a level with the ground.

Features:

• Pre-oiled and pre-set for immediate installation.
• Close proximity of pump and jack gives fast response.
• Close pivot point (45 mm) to gate pier.
• Manual release from inside and outside of property.
• Choice of 110 deg or 175 deg rotation angle.
• Braking or non-braking versions available.
• Conforming to EN 12445, EN 12453 safety standards.
• All-in-one pump and jack unit, contained in a single enclosure, is sunk into the ground at the foot of the left-hand and right-hand gate to achieve synchronised operation. The unit should be piped into a soak-away to allow for water drainage.

Technial Specifications:

CLASS H, TWO-PHASE, ELECTRIC MOTOR
• Power output 0.18 KW (0.25 HP)
• Supply voltage 230 V - 50 Hz
• Absorbed current 1.2 A
• Absorbed power 250 W
• Capacitor 12.5 uF
• Motor rotation speed 1 350 rpm
• Intermittent service S 3
DOUBLE STROKE JACK AND OIL-HYDRAULIC PUMP
• Pump flow rate-P3 0.85 l /min.
• Working pressure 1 MPa (10 bars)
• Max. pressure 3 MPa (30 bars)
• Working temperature -20 C 80 C
• Rotation time (110 deg) 23 s
• Type of oil A 15 FADINI by AGIP
• Shaft rotation angle 110 deg
• Rated torque 137.3 Nm
• Cylinder bore 75 mm
• Stroke 52 mm
• Weight with accessories 27 Kg
• IP Standards IP 673
• Static gate weight 700 Kg
• Overall dimensions (LxWxH) 470x300x150 mm
• Duty cycle 23 sec. Open - 30 sec. Dwell - 23 sec. Close
• Time of one complete cycle 76 s
• No. of complete cycles: Open - Dwell- Close 47/hour
• No. of cycles a year, 8 hours a day 137 000
DAMPENING
• Pump flow rate - P3 0.85 l /min.
• Rotation time (175 deg) 28 s