BPT Impro 2 Door TCPIP Intelligent Controller with 3Amp PSU

Impro GB/IPS922 2 Door TCPIP Intelligent Controller

The ImproX (iTRT) Intelligent Twin Reader Terminal is the second generation of the highly successful ImproX TRT. Using the RS485 Bus Connection, the ImproX iTRT works within the ImproX range of Access Control Systems, as well as within OEM applications.

The ImproX iTRT is capable of working with a variety of ImproX Hardware. This includes the Multi-discipline Reader Range, the Wiegand Reader Range, the Multi-mode Remote Range as well as various Third-party Barcode and Magstripe Readers. In applications that require extended range, you can connect the ImproX (IR) Infrared Receiver and the ImproX RF 4-Channel Receiver to the ImproX iTRT. Each ImproX iTRT is designed to be used with up to two Readers or Receivers.

Major memory improvements allow the ImproX iTRT to store up to 10 000 Tags and 10 000 Buffered Transactions per channel as well as providing the added benefit of off-line validation. In this optional mode the ImproX iTRT allows access to Tags present in the TerminalÕs transaction buffer. This is valuable should communications between the ImproX iTRT and the Controller disrupt.

Other new features include a Software Utility which allows you to upgrade the Terminal while installed on site with zero down-time.

Features:

• Cost effective solution that fits seamlessly into legacy Systems
• Support for the following Terminal Communication options: Ethernet - Door Controllers connect to your chosen System Controller using the existing IP infrastructure. RS485 - an ultra reliable method (not affected by network problems) of connecting to your chosen System Controller
• Onboard intelligence means the Terminal can run off-line from the Controller
• Interfaces to the following ImproX Readers: Multi-discipline, Wiegand and Multi-mode
• Offers full Wiegand Support
• Interfaces to the ImproX IR, ImproX RF, and Third-party Wiegand Readers
• Connection to up to two Readers or Third-party Devices at each ImproX iTRT. Allows Relaxed or Full Anti-passback (APB) access on a single Door or single entry on two Doors
• End-of-line (EOL) Sensing on Door Open Sensor (DOS) Inputs
• Operation from power inputs in the range 10 V to 30 V DC
• An excellent user interface consisting of 14 LED Diagnostic Indicators
• Onboard memory for Off-line Redundancy supporting: Up to 10 000 Tags and Up to 10 000 buffered transactions per channel
• Two 10 A independent single-pole, double-throw (SPDT) Relay Outputs that allow you to interface to door strikes, magnetic locks and other third party devices (for example alarm panels or lighting)
• Four Digital Inputs including two Door Open Sensor (DOS) and two Request to Exit (RTE) Inputs
• A Software utility to upgrade Firmware while installed on-site, without removal of the Terminal and with zero downtime.

Technical Specifications:

• Colour : Black
• Cabinet : Mild Steel
• Approximate Weight : 3 kg
• Operating Temperature (C): -25 to +60
• A 3 Amp Switch Mode Power Supply providing 13.8V DC to charge a 12V 7 Ahr Sealed Lead Acid Battery
• Nominal output voltage of 13.8V DC with a fully charged Battery
• Automatic switch-over to Battery operation on Mains Failure
• Compact, Mild Steel Cabinet, accommodating the Power Supply, Controller or Terminal and a Sealed Lead Acid Battery
• Two 13.8 V Power Outputs for powering the Terminal and, for example, a lock. Together these Outputs have a maximum power output of 2 A (max) continuous at 13.8 V DC
• Five Quick Click Glands for easy wiring
• Fuses on mains in and low voltage out

Dimensions:

• 305 x 295 x 77 (hwd mm)