Loading...

BPT Fadini F/741.7.748RH | COMBI 740, 110 Degree, Right

£1,013.04 £844.20
SKU
F/741.7.748RH
  • This product is available to order. The lead time is normally 2 – 4 working days.
  • An accurate despatch date will be confirmed with you once order is received by our sales team (during office hours).
Free Delivery

Free Delivery on this product

CAME BPT Fadini F/741.7.748RH | COMBI 740, 110 Degree, Right

The COMBI 740 operator for swinging gates is designed for below-ground installation and to be positioned at the foot of the

BPT Fadini F/741.7.748RH | COMBI 740, 110 Degree, Right

The COMBI 740 operator for swinging gates is designed for below-ground installation and to be positioned at the foot of the gate, perpendicular to the hinge supporting the gate to be opened.

Compact design for easy installation

The all-in-one unit incorporating the basic enclosure and the hydraulic jack pump/motor set has been specifi cally designed for problem-free installation. The mechanism is supplied fully functional and no adjustment or hydraulic oil top-ups are necessary. The enclosure is sunk in concrete next to the pillar, ensuring that the surface edge is perfectly horizontally aligned and on a level with the ground.

Perfection in each and every detail, for total security

To guarantee safety against crushing, the motor pump unit is fitted with pressure valves that are conveniently located for torque adjustments yet protected to prevent tampering. The two-way hydraulic locking device is built into the valve assembly, works automatically inside the hydraulic circuit to interrupt the oil hydraulic circuit and hold firmly the gate in open and closed positions. The main torque shaft is manufactured using specially treated steel to bear considerable static load, torque and overload (including strain exerted manually) meeting high performance demand.

The oil-hydraulic jack is available with an opening and closing deceleration function on request. On request, it is also possible to order a non-locking operator to allow the application of an electric lock to hold the gate closed. The electric supply cable sealed to the bottom of the oil tank and connected to the electric motor is long-lasting, weather-proof and resists temperature changes, thanks to the special cable sheath that encloses the three power wires and an earth wire, which are all clearly marked. The entire oil-hydraulic unit is commanded by a dedicated programmer with a highly reliable electronic circuit. In the event of a power cut, manual gate opening is made possible by a mechanical release shoe that can be applied between the jack shaft and foot of the gate and can be activated by a specifi cally designed spanner.

In addition to the pressure cast aluminium cover, on request a stainless steel cover is available that makes the operator even more elegant and safe over time.

The COMBI 740 gate operator is built in the Meccanica Fadini factories and is the result of years of research, studies and specifi c tests to guarantee its quality and reliability over time.

Features:

  • Easy installation
  • Fully functional mechanism supplied

Technial Specifications:

  • Motor pump unit is fitted with pressure valves
  • Pressure cast aluminium cover
More Information
Brand Fadini
Attachments
BPT Fadini COMBI 740 Brochure pdf(0.87MB)
BPT Fadini Combi 740 Technical Data pdf(0.16MB)
BPT Fadini Combi 740 Installation instructions pdf(1.57MB)
Door Entry Direct © 2024. All rights reserved.