Loading...

BPT Fadini F/669 | JUNIOR 633 Sliding Gate Kit 230V Up To 600kg

£1,234.80 £1,029.00
SKU
F/669
  • This product is available to order. The lead time is normally 2 – 4 working days.
  • An accurate despatch date will be confirmed with you once order is received by our sales team (during office hours).
Free Delivery

Free Delivery on this product

CAME BPT Fadini F/669 | JUNIOR 633 Sliding Gate Kit 230V Up To 600kg

This unit is an electro-mechanical geared motor to open and close residential sliding gates having a max. weight of

BPT Fadini F/669 | JUNIOR 633 Sliding Gate Kit 230V Up To 600kg

This unit is an electro-mechanical geared motor to open and close residential sliding gates having a max. weight of 600kg. It is fitted with a 24V dc low voltage motor, designed and produced in full compliance iwth the EN 12445, EN 12453 Safety Norms and the EN 1321 Product Norm.

JUNIOR 633 gear box is made of pressure cast aluminium and its movements and inertia are cushioned by a shock absorber made of elastic, oil-proof material, ensuring the high quality standards of this product, tested on real field applications. All the inner functional parts are fitted with seals and oil rings, and are lubricated by a high performance grease, specific for gear driving.

The main supply terminals are protected by a fuse, thus providing maximum safety on maintenance. Junior 633 can be overridden by pulling the release handle open through an encoded key. Whenever the release handle is opened, power is disconnected, but programme parameters are retained. Rechargeable back-up batteries can be supplied on request, allowing only few open/close operations in case of power failure.

Junior 633 can be installed either by 4 expanding bolts into the ground or by means of an anchoring base plate with 4 log bolts; this kind of fitting allows the unit to be adjusted to the most suitable height as required.

The functioning of the whole installation is monitored by the diagnosys led that is factory-fitted to the operator cover. Elpro 63 is the control PCB that operates this unit and it is standard incorporated in it in the top section, right under the cover, which can be taken off by removing two lateral fixing screws. The PCB is protected by a removable clear cover.

Junior 633 can be either right or left-handed mounted. Either option is made switch-abled and selection occurs at the time of installation, no need to adjust the electric motor phase or the limit switches. It is designed in the circuitry of the control board that gate travel and slow down starting times are self learned through a dedicated button switch; where torque control, dwell time and pedestrian partial opening can be adjusted through potentiometers to meet the application requirements.

Features:

  • Max. gate weight - 600kg
  • Anchoring base plate c/w 4 log bolts - M10
  • Speed - 10/1
  • Gear ratio - 1:45

Technical Specifications

  • Supply voltage - 230V-50Hz
  • Motor voltage - 230V-50Hz
  • Max. absorbed power - 400W
  • Max. absorbed current - 2A
  • Max.torque - 600N
  • Protection standards - IP54
  • Lubrication - grease
  • Working temperature - -20 degrees C +50 degrees C
  • Weight - 11.3kg

The kit includes:

  • 1 x Elpro 62, Astro 43
  • 1 x piccolo, CHIS 37,
  • 1 x FIT 55 photocells
  • 1 x Miri 4 flashing light
  • 1 x EN 12445 - EN 12453 Approved
More Information
Brand Fadini
Attachments
BPT Fadini JUNIOR 633 Technical Data pdf(0.29MB)
BPT Fadini JUNIOR 633 & 650 Installation instructions pdf(2.72MB)
BPT Fadini JUNIOR 624, 633, & 650 brochure pdf(1.08MB)
Door Entry Direct © 2024. All rights reserved.