Loading...

BPT Fadini F/2264 | VIGILO 2251 Hydraulic Bollard

£4,002.00 £3,335.00
SKU
F/2264
  • This product is available to order. The lead time is normally 2 – 4 working days.
  • An accurate despatch date will be confirmed with you once order is received by our sales team (during office hours).
Free Delivery

Free Delivery on this product

CAME BPT Fadini F/2264 | VIGILO 2251 Hydraulic Bollard

This electro-hydraulic post for traffic control. The motor pump is incorporated and pre-connected.This makes the unit easier to in

BPT Fadini F/2264 | VIGILO 2251 Hydraulic Bollard

This electro-hydraulic post for traffic control. The motor pump is incorporated and pre-connected.This makes the unit easier to install.The cylindrical post is made of steel, has a diametre of 200 mm and can be commanded to rise from the ground level or lower by remote.

This option is VIGILO 2251 with 500mm stroke and is fitted with mechanical limit switches, for rising and lowering cycles, and 8 led lamps for intermittent light.

All the essential component parts (motor pump and hydraulic actuator) are inside the location enclosure, which is made of cataphoresis treated steel, a special treatement to prevent rust, and designed to be sunk into the ground.

The up and down movements are carried out by the piston shaft, directly connected to the top of the post from inside the unit. This automation is factory pre-set and calibrated making installation quick and easy in that no further adjusting is needed for proper ooperations. Just the electrical connections are required to be made on site for the electric motor, led lamps and limit switches (supplied with the equipment in 10 m lenghts, each) to the electronic control board Elpro S40.

The movement of the post is topped by means of a water-tight limit switch, operated by a sliding feeler, fitted on to the post. The connections between the motor pump assembly, positioned in the front side of the automation, and the hydraulic actuator are by means of rigid copper pipes completely inside the foundation housing.

A shaped universal spanner is supplied with the post to over-ride the hydraulic circuit in the pump inside the enclosure and lower the unit by hand if required. The cover of the square enclosure is designed to remain clear of standing water or other fluids. A rubber brim is fitted to protect the top edge of the post.

A back reflecting sticker, with red and yellow stripes, ensures full visibility of the post in daylight as well as in the dark, even in difficult weather conditions.

Features:

  • Back reflecting sticker
  • Rubber brim
  • Water-tight limit switch

Technial Specifications:

  • Steel construction
  • Diametre 200mm
More Information
Brand Fadini
Attachments
Fadini VIGILO 2251 Bollard Site Survey pdf(0.18MB)
Fadini VIGILO 2251 Technical Data pdf(0.33MB)
Fadini VIGILO 2251 Installation instructions pdf(1.36MB)
Door Entry Direct © 2024. All rights reserved.