0208 621 6210

m menu image  m home m cart
Click here for Access Control Products

Click here for Door Entry Intercom Products

Click here for Gate Automation Products

Click here for Home Automation Products

Click here for Electric Locking Products

Click here for Installation Accessories

Click here for Clearance Products
Twitter

Gianni - Wireless stainless steel PTE narrow button


Model:WPB-025JS

£97.20 Inc VAT
£81.00 Ex VAT£163.64


Description

Gianni - Wireless stainless steel PTE narrow button

The small press to exit button is made from durable brushed stainless steel and is installed on the surface of the wall. Having a wireless push to exit button on an exit door allows for an easier and cost effective installation, saving on time and cable.

The controller is connected to the maglock above the door and when the button is pressed the lock will release. The maximum range between the controller and where the button is installed is between 50 to 60 meters. The door can be set to remain unlocked for set periods of time; 1, 3, 5, and 10 seconds.

Technical Data:

  • RF Hopping Code Controller:
  • Operating voltage: 12-24 V DC
  • Current Draw: Pull in: 50 mA/12 V DC, Holding: 20 mA/12 V DC
  • Pull in: 70 mA/24 V DC, Holding: 40 mA/24 V DC
  • Output contact: SPDT rated 3A/12VDC dry contact
  • Buzzer indicator: The internal buzzer will set off the alarm by battery lower than 9.2 V DC
  • LED indicator: Green LED: Power, Red LED: Signal receiving & sending
  • Dimensions: 83 (L) x 62 (W) x 30 (D) mm
  • Remote Transmitter:
  • Operating voltage: 12 V battery
  • Transmitting frequency: 433 KHz
  • LED indicator: Judge the volume of dry battery by LED's brightness
  • Embedded modules: Hopping Code IC
  • Duration: Max.13,000 cycles
  • The lowest voltage: No less than 7 V
  • Dimensions: 115 (H) x 42 (W) x 40 (D) mm






Copyright © 2016 Door Entry Direct