0208 621 6210

m menu image  m home m cart
Click here for Access Control Products

Click here for Door Entry Intercom Products

Click here for Gate Automation Products

Click here for Home Automation Products

Click here for Electric Locking Products

Click here for Installation Accessories

Click here for Clearance Products
Twitter

Gianni Electric flush solenoid bolt with KO 12 V DC


Model:EB260

£115.20 Inc VAT
£96.00 Ex VAT£193.94


Description

Gianni EB260 Electric flush dropbolt (solenoid) with key override - 12 V DC

The EB260 electric dropbolt incorporates a mechanical cylinder to lock or unlock the door manually in case of an unexpected power failure and is made for single action doors only. The door close sensor can detect within a range of 5 mm. If the door gap is too wide, a magnet within the strike plate can be adjusted to improve detection accuracy.

Features:

  • Flush installation
  • Energy saving design (After the dropbolt is completely locked, the current draw changes from 1.0A to 0.3A to prolong its life.)
  • Adjustable time lock delay (Door locking time delay lasts from 1.5 to 9 seconds adjustable by jumper PINs.)

Technical Data:

  • Fail-Secure Version (Power to Unlock)
  • Operating Voltage: 12~28 VDC
  • Voltage Tolerance: +- 10 percent
  • Current Draw: Pull in: 1.0A, Holding: 0.3A/12VDC (at 20 C)
  • Operating Temperature: -10~+45 C
  • Humidity: 0~95 percent non-condensing.
  • Tested over 500000 cycles.
  • Faceplate Material: Zinc alloy
  • Auto-relocking Time Delay : 1.5, 3 ,6 ,9 seconds
  • Net Weight: 1.3 Kg


Downloads


EB260 Data Sheet

Related Products

SRS - 12 V DC 1.5 Amp DIN Mount Power Supply

1201DIN


£19.18 Inc VAT
£15.98 Ex VAT

RGL Boxed PSU, Switch mode, 13.8V DC 1.0A 225x200x75

1201SM-1


£22.13 Inc VAT
£18.44 Ex VAT






Copyright © 2016 Door Entry Direct