0208 621 6210

m menu image  m home m cart
Click here for Access Control Products

Click here for Door Entry Intercom Products

Click here for Gate Automation Products

Click here for Home Automation Products

Click here for Electric Locking Products

Click here for Installation Accessories

Click here for Clearance Products
Twitter

COMBI 740 110 deg Locking Left Hand Underground Operator


Model:F/7417748LH

£948.01 Inc VAT
£790.01 Ex VAT£831.59


Description

COMBI 740 110 deg Locking Left Hand Underground Operator

The COMBI 740 operator for swinging gates is designed for below-ground installation and to be positioned at the foot of the gate, perpendicular to the hinge supporting the gate to be opened.

Compact design for easy installation

The all-in-one unit incorporating the basic enclosure and the hydraulic jack pump/motor set has been specifi cally designed for problem-free installation. The mechanism is supplied fully functional and no adjustment or hydraulic oil top-ups are necessary. The enclosure is sunk in concrete next to the pillar, ensuring that the surface edge is perfectly horizontally aligned and on a level with the ground.

Features

  • Pre-oiled and pre-set for immediate installation.
  • Close proximity of pump and jack gives fast response.
  • Close pivot point (45 mm) to gate pier.
  • Manual release from inside and outside of property.
  • Choice of 110 deg or 175 deg rotation angle.
  • Braking or non-braking versions available.
  • Conforming to EN 12445, EN 12453 safety standards.
  • All-in-one pump and jack unit, contained in a single enclosure, is sunk into the ground at the foot of the left-hand and right-hand gate to achieve synchronised operation. The unit should be piped into a soak-away to allow for water drainage.

Technical Data:

CLASS H, TWO-PHASE, ELECTRIC MOTOR

DOUBLE STROKE JACK AND OIL-HYDRAULIC PUMP

DAMPENING


  • Power output 0.18 KW (0.25 HP)
  • Supply voltage 230 V - 50 Hz
  • Absorbed current 1.2 A
  • Absorbed power 250 W
  • Capacitor 12.5 uF
  • Motor rotation speed 1 350 rpm
  • Intermittent service S 3

  • Pump flow rate-P3 0.85 l /min.
  • Working pressure 1 MPa (10 bars)
  • Max. pressure 3 MPa (30 bars)
  • Working temperature -20 C 80 C
  • Rotation time (110 deg) 23 s
  • Type of oil A 15 FADINI by AGIP
  • Shaft rotation angle 110 deg
  • Rated torque 137.3 Nm
  • Cylinder bore 75 mm
  • Stroke 52 mm
  • Weight with accessories 27 Kg
  • IP Standards IP 673
  • Static gate weight 700 Kg
  • Overall dimensions (LxWxH) 470x300x150 mm
  • Duty cycle 23 sec. Open - 30 sec. Dwell - 23 sec. Close
  • Time of one complete cycle 76 s
  • No. of complete cycles: Open - Dwell- Close 47/hour
  • No. of cycles a year, 8 hours a day 137 000

  • Pump flow rate - P3 0.85 l /min.
  • Rotation time (175 deg) 28 s






Copyright © 2016 Door Entry Direct