0208 621 6210

m menu image  m home m cart
Click here for Access Control Products

Click here for Door Entry Intercom Products

Click here for Gate Automation Products

Click here for Home Automation Products

Click here for Electric Locking Products

Click here for Installation Accessories

Click here for Clearance Products
Twitter

SRS Smart.Netv2 - door access control unit


Model:40020201

£208.49 Inc VAT
£173.74 Ex VAT£238.00


Description

SRS Smart.Netv2 - single door access control unit

SRS door access control system unit manages a single door or entrance point and is connected back to the management PC. The PC is connected to this door network from one spare USB port. Each door access security control unit will allow the connection of the following facilities:

Each door or entrance may have 1 or 2 card readers permitting a total of 256 system readers. The secured doors are connected by a dedicated cable network, consisting of two twisted pairs and a screen (5-wire). The maximum distance of this cable network is 1200 meters.

The door or entrance is controlled by a local door access control unit which allows the connection of all the door facilities such as readers, local power supply and electric locking. The door access control unit acts as a junction point for all the door facilities and allows the dedicated network to be passed onto the next door or entrance.

Features:

  • Entry card reader
  • Exit card reader (optional)
  • Exit request button (optional)
  • Intruder alarm connection (optional)
  • Electronic locking device
  • Magnetic door contact
  • Local alarm sounder or similar
  • 12VDC PSU for locking and power
  • Dimensions H: 120mm W: 155mm D: 30mm

The adjacent door system drawing excludes the optional exit card reader and local alarm sounder for clarity. The door controller is designed to be located above or near the door or entrance it serves.

Every SRS Smart.Netv2 controller requires a 150mAmp, 12VDC power source and can be powered by the locking devices power supply. The door access security control unit, is housed in a composite case that is usually mounted close to the door or entrance it is managing to minimize local cabling runs. It allows cable entry by way of 20mm cable entry points that can be utilized with or without additional cable entry glands.

The local SRS Smart.Netv2 unit is a compact and low power and can be installed by electrical & security installers with ease. All functions and appliances associated with an individual door or entrance can be tested in isolation by virtue of the built-in engineer test mode function.

This access control system is extremely powerful, easy to use and most importantly easy to set up. The SRS Smart.netv2 is must have recommended system

Please click here to download the Smart.NetV2 Setup file.


Product Attributes

Door Inputs 1 door controller
Reader Inputs 2 reader inputs
Reader Format Generic Weigand 26 BIT
Network Type SRS Smart.Netv2 RS485



Related Products

SRS Smart.Netv2 proximity reader - 26 bit Weigand format

40020320


£63.07 Inc VAT
£52.56 Ex VAT

SRS Smart.Netv2 - USB485 Adapter

40020101


£138.41 Inc VAT
£115.34 Ex VAT

Switch Mode Power Supply in Small Box (12 V 2 A)

PS2A-12VS


£30.60 Inc VAT
£25.50 Ex VAT






Copyright © 2016 Door Entry Direct