0208 621 6210

m menu image  m home m cart
Click here for Access Control Products

Click here for Door Entry Intercom Products

Click here for Gate Automation Products

Click here for Home Automation Products

Click here for Electric Locking Products

Click here for Installation Accessories

Click here for Clearance Products
Twitter

BPT Coded auxiliary relay


Model:VLS/100C

£118.80 Inc VAT
£99.00 Ex VAT£99.00


Description

BPT VLS/100C Coded auxiliary relay

VLS/100C is a relay designed to control auxiliary services. When jumper SW2 (fig.2 in installation manual) is placed to position C the relay is controlled by the coded signal sent either by the entry panel or porter swirchboard. When jumper SW2 (fig.2 in installation manual) is placed to position INT the relay is controlled by the coded signal sent by a intercom call button on intercom receivers series.

The duration the relay stays energized depends of jumper SW3, figure 2 in installation manual. When SW3 is placed to position T the time can be regulated by means of potentiometer P1, figure 1 in installation manual, from about 0.6 sec. to 10 sec., after which it de-energizes even if the code is still sent.

When SW3 is placed to position T the relay remains energized, after the time preset by P1 has elapsed, if the coded signal is still present. NOTE. Take off top frame to reach SW2 and SW3 jumpers.

The acces key to VLS/100C is controlled by jumpers CD, figure 1 in installation manual. The code to be set on VLS/100C must much that of controlling unit, i.e.:

- When VLS/100C is controlled by entry panel or porter switchboard refer to tables in relevant instructions sheet.

- When VLS/100C is controlled by intercom receivers refer to table in figure 4 in installation manual.

Technical features

  • Supply voltage: 14-17,5VDC.
  • Current demand: 60mA.
  • Max. load to relay contact 250V, 5A (2A if load is inductive).
  • Working temperature range: from 0 degrees C to +35 degrees C.
  • Dimensions: 4 DIN units module, low profile (fig. 3 in installation manual).
  • The unit can be installed without terminal covers into boxes provided with DIN rail (EN 50022).






Copyright © 2016 Door Entry Direct