0208 621 6210

m menu image  m home m cart
Click here for Access Control Products

Click here for Door Entry Intercom Products

Click here for Gate Automation Products

Click here for Home Automation Products

Click here for Electric Locking Products

Click here for Installation Accessories

Click here for Clearance Products
Twitter

Stainless Steel VIGILO 2281 Hydraulic Bollard


Model:F/2294

£3,184.02 Inc VAT
£2,653.35 Ex VAT£2,793.00


Description

Stainless Steel VIGILO 2281 Hydraulic Bollard

This electro-hydraulic post for traffic control. The motor pump is incorporated and pre-connected.This makes the unit easier to install.The cylindrical post is made of steel, has a diametre of 200 mm and can be commanded to rise from the ground level or lower by remote.

This option is VIGILO 2281 with 800mm stroke and is fitted with mechanical limit switches, for rising and lowering cycles, and 8 led lamps for intermittent light.

All the essential component parts (motor pump and hydraulic actuator) are inside the location enclosure, which is made of cataphoresis treated steel, a special treatement to prevent rust, and designed to be sunk into the ground.

The up and down movements are carried out by the piston shaft, directly connected to the top of the post from inside the unit. This automation is factory pre-set and calibrated making installation quick and easy in that no further adjusting is needed for proper ooperations. Just the electrical connections are required to be made on site for the electric motor, led lamps and limit switches (supplied with the equipment in 10 m lenghts, each) to the electronic control board Elpro S40.

The movement of the post is topped by means of a water-tight limit switch, operated by a sliding feeler, fitted on to the post. The connections between the motor pump assembly, positioned in the front side of the automation, and the hydraulic actuator are by means of rigid copper pipes completely inside the foundation housing.

A shaped universal spanner is supplied with the post to over-ride the hydraulic circuit in the pump inside the enclosure and lower the unit by hand if required. The cover of the square enclosure is designed to remain clear of standing water or other fluids. A rubber brim is fitted to protect the top edge of the post.

A back reflecting sticker, with red and yellow stripes, ensures full visibility of the post in daylight as well as in the dark, even in difficult weather conditions.



Related Products

MIRI 4 - Flashing Lamp

F/4600


£41.04 Inc VAT
£34.20 Ex VAT

ELPRO S40 Control Panel

F/7280


£543.78 Inc VAT
£453.15 Ex VAT






Copyright © 2016 Door Entry Direct